Valve put out a small update to Proton Experimental to begin the weekend, with fixes for the Epic Games Store and a few games for Linux, SteamOS and Steam Deck.

.

Read the full article on GamingOnLinux.

Hello guys,

I'm facing some problems while playing The Headliners on Steam. This is the first game that won't run using Steam Play with Proton despite the fact that ProtonDB shows the game as "Platinum"

When I'm launching the game, everything works fine in the main menu. This is only when I'm joining a lobby (whether I'm creating one or joining one) that the game begins to freeze, running at < 2 fps and finally totally stops.

This is what I've tried so far:

• Rebooting
• Checking game files with steam
• Uninstalling/Reinstalling the game
• Switching from automatic Proton to Proton Hotfix, Experimental, 9.0-4, 8.0-5 and 7.0-6 (the last one wouldn't launch the game at all)
• Tried adding "SDL_AUDIODRIVER=alsa PULSE_LATENCY_MSEC=60 %command%" while launching the game as someone on ProtonDB pointed
• Putting all the graphics in game at low
• Switching off anti-aliasing, V-sync etc.
• Switching from Windowed to Full Screen

Nothing worked. Would you guys have any idea ?

I'm considering using Lutris or Bottles but I'd rather stick to Steam.

I've got a Windows partition and the game works perfectly so this doesn't seem to be a hardware problem.

Anyway, this is my setup:

https://preview.redd.it/efkrrr6tkecf1.png?width=362&format=png&auto=webp&s=56ed211a8e0d231b838e262d710d605c3152b044

Thanks a lot !

submitted by /u/Jackvolfe
[link] [comments]

I recently installed KDE Neon on my Computer and tried to play PoE today. But all I get are 5 FPS, Hardware shouldn’t be the issue here because on Windows the game runs perfectly. Does anyone have a Solution for this problem?

submitted by /u/Euphoric-Increase876
[link] [comments]

So I've been on Linux Mint for the past year or so until about a week ago I switched to EndeavourOS, its good and works, but since I am on a hybrid gaming laptop (MSI GF63 Thin with GTX1650 Max Q - Intel i5 gen 10th - 16GB ram) My gaming experience is kinda stuttering and not that good, but back on Linux Mint my gaming proformance was very good, on Insurgency Sandstorm I had solid 60 FPS on high settings but here on EndeavourOS i have 35 FPS on the lowest settings! Before you ask yes I tried other compatability tools but none gave me a boost in FPS.

I really didn't tried gaming on CachyOS so I really dont know how it will preforme on my laptop. But I really love EndeavourOS that i just want to stick with it for the rest of my life, maybe its because i am in love with the Purple color?

TL;DR I want to ask can I fix my bad proformance on my EndeavourOS?

Or

Should I switch to CachyOS?

I use Linux for both work and gaming.

I don't dual boot Windows.

submitted by /u/iAMStrangeDude-
[link] [comments]

Logitech g923(xbox or ps) vs g29 vs g920 vs thrustmaster t248(xbox or ps)?

submitted by /u/Significant-Iron-258
[link] [comments]

Screenshot was taken while running CS2, avg fps I'm getting is around 20-40

I have a rtx3050 with ryzen 5 5600H. I switch to X11

__NV_PRIME_RENDER_OFFLOAD=1 __GLX_VENDOR_LIBRARY_NAME=nvidia __VK_LAYER_NV_optimus=NVIDIA_only %command% launch option I am using rn

thanks for the help

submitted by /u/built_stupid_
[link] [comments]

I know that has anti cheat, but recently i come to know that certain games with anti cheat works now on linux. Is Halo one of them rn? Because i don't want to pay online for playing on my xbox

submitted by /u/krathos918
[link] [comments]

Hey guys :) I’m using nebora fedora Linux with kde plasma and Wayland. I can’t get any Programm to work like parsec and anydesk. Vnc quality is to bad and I can’t see a mouse. Do you have any recommendations?

Edit: rustdesk only have problems, the mouse is everytime in the wrong position:(

submitted by /u/Greenfreeze1996
[link] [comments]

Hey, I am running Content Manager for Assetto Corsa through proton. The default font is really ugly and it breaks the ui in some cases. Any way to change the font face and size using something like winetricks? I am using proton GE 10-8.

submitted by /u/Red-Eye-Soul
[link] [comments]

Is anyone running Simhub on Linux, and how? i.e via Wine?

I ditched Windows for everyday stuff years ago and currently i have it only to run SimHub and Platform Manager for the Motion V3. Is it possible to emulate or similar the whole applications part.

So far i tested this:

Tested Simhub 9.8.4 and Platform manager

SimHub

After creating a “game” bottle and run the SimHub install setup there were some error messages and the initial startup was unsuccessful.

Creating “custom” bottle and adding the following dependencies as suggested by u/rephazer here: https://www.reddit.com/r/SimHub/comments/1erkmos/simhub_running_on_linux_with_bottles/ it worked:

all fonts

arialb32

dotnet48

vcredist2019

times32

Left the runner soda.

Launching SimHub works now. I can see both Arduinos and add the Vocore but can’t see it. Is there some setting needed that you can utilise USB peripherals?

The applications freezes when trying to configure sound output for the buttkickers.

I was able to get the Arduinos running: wind and rumble pedals. Applied 1:1 settings like i have them in usually on Windows .

Vocore display and Bass shakers don't work. When setting up an audio output device the bottles SimHub window freezes...

Unfortunately the wind sim and rumble pedals do not work in Game (tried with ACC) seems that they are not in the same network.

Platform Manager

Creating a “custom” bottle and using installation works but the GUI glitches.

Creating a new bottle and changing the runner from soda to sys wine solves the GUI issue.

But the same issue occurs here: I can’t see my Motion v3 which is connected via USB. Detected in OS.

Tried adding all permissions in Flatseal to Bottles.

It still doesn’t detect the USB device.

Any input here? Is there some passthrough for network and USB needed for these to be recognized?

It's funny that the Arduinos get recognized.

The setup i tested this on

PC:

Ryzen 5900x

64GB Ram

RTX3080

OS:

Bazzite 42

KDE PLasma version 6.4.2

KDE Frameworks Version 6.15.0

QT Version: 6.9.1

Kernel Version: 6.15.4-106bazzite.fc42.x86_64 (64-bit)

Graphics Platform: Wayland

Hardware of the rig:

2x Arduino

Fanatec DD Pro

CSL Pedal with Load Cell

Vocore Display

Motion v3 Platform

2x Buttkickers

Rumble motors on pedals (Arduino)

Wind sim (Arduino)

submitted by /u/nino_zh88
[link] [comments]

Maybe someone else already post about cloud saving working but I would like to say, just to make sure for those that maybe have the same question about achievement from GOG, yes they can be unlocked using Heroic Launcher, maybe you don't have the overlay like EG, but it is working c:

submitted by /u/Belmont182
[link] [comments]

Sorry if this has been answered before i wasn't able to find a proper answer.

Lets Assume i have 3 disks:

Disk X - Windows

Disk Y - Linux

Disk Z - Steam Library

Is it possible to use Disk Z with the games on it in The Windows and Linux version of Steam?

Can i just add the library path and call it a day or is this not supported, compatible or similar?

This would save the hassle of re-downloading stuff or having it stored twice.

submitted by /u/nino_zh88
[link] [comments]

submitted by /u/beer120
[link] [comments]

Hey, I installed the game via steam but it refuses to launch. I have tried using different versions of Proton, including GE and experimental to no avail. This is odd, as other games run well. Any clues? Running Cachyos.

submitted by /u/LordLTSmash
[link] [comments]

submitted by /u/ScriptNone
[link] [comments]

I was playing some games like Crash Bandicoot 4 and REPO and the graphics looked perfectly fine, then I started playing TABS and it felt somewhat deepfried. The next day when I tried to play Crash 4 the shadows and reflections had broken into giant squares, same thing with REPO and it happens with DOOM Eternal.
Any idea as to why this happened?

Arch Linux 6.15.6-arch1-1
NVIDIA RTX 4060
Ryzer 5 5600G
KDE Plasma Wayland

submitted by /u/MatteoIppolito
[link] [comments]

submitted by /u/Mediocre_Ad_6239
[link] [comments]

Tengo una PC Dell Latitude E6440 con una GPU Intel HD Graphics 4600 y no es compatible con Vulkan, lo que me genera numerosas dificultades al tratar de utilizar Wine o Proton para los videojuegos. ¿Qué podría hacer?

submitted by /u/101mdtb
[link] [comments]

submitted by /u/Turbulent_Pay8232
[link] [comments]

Hi, I am using Fedora 42 and amd 6800xt,

3D_FULL_SCREEN* when cat /sys/class/drm/card1/device/pp_power_profile_mode

I have a 2560x1440 resolution.

Dota 2 is running around 50fps.

What am I missing?

=(

kernel version 6.15.4-200.fc42.x86_64

mesa: 25.0.7

submitted by /u/VargasIdiocy
[link] [comments]