Wine 11.5 has arrived with new bug fixes and features for running Windows apps and games on Linux, with a nice sounding compatibility improvement.

Read the full article on GamingOnLinux.

Proton:

• update latest wine bleeding-edge
• update latest dxvk
• update latest dxvk-nvapi
• update latest vkd3d-proton
• update latest vkd3d
• update latest FEX
• import proton script game fixes from upstream
• import aarch64 build changes from upstream

Protonfixes:

• added protonfix for god of war ragnarok playstation sdk error
• added protonfix to disable hidraw and enable sdl for gta v
• added protonfix for GOG version of Oddworld: Stranger's Wrath HD
• added protonfix for cpu topology for Assassin's Creed 1

Patches:

• patches: Enable .exe dynamic relocation. For XIV specifically, this fixes issues with low address space being filled up by everyone and everything and, as a result, some plugins failing to apply their hooks and leaving the game in an unstable state.

New Features:

• add new PROTON_WAYLAND_MONITOR to allow easier setting of WAYLANDDRV_PRIMARY_MONITOR

• attempt to detect and set primary monitor if wayland is enabled and no primary is set

How these work:

You can now specify something like PROTON_WAYLAND_MONITOR=HDMI-A-1 to specify which monitor the wine-wayland driver uses when enabling wayland. Previously you could already do this using WAYLANDDRV_PRIMARY_MONITOR, but it wasn't documented. PROTON_WAYLAND_MONITOR is now an easier to remember envvar for setting that value. Additionally by default if no WAYLANDDRV_PRIMARY_MONITOR is set when enabling wine-wayland, GE-Proton will now attempt to use xrandr to detect the default primary monitor set by the desktop environment, and if found, display on that monitor, just like xwayland does.

submitted by /u/VoriVox
[link] [comments]

Made the switch and everything works out of the box. No more weird in game mouse bug!! o7

Been enjoying my time using CachyOS and KDE

submitted by /u/xeroxgru
[link] [comments]

Hi, has anyone working vibration with this controller? If so, what's your setup?

Everything works fine exept vibration. I tried it wired, with dongle and with bluetooth, always the same. I play on Steam where it's not recognised as a Xbox controller.

Firmware of dongle and contoller is up to date.

I found this and tried holding the Share + Menu button for 3 seconds:
1. Wired the controller reconnected but after that no change.
2. With dongle and bluetooth only the screenshot utility pops up (the share button alone always do that), no change of input mode, no vibration.

I also tried xone without success.

I use TUXEDO OS (based on Ubuntu 24.04) with kernel 6.17 and KDE Plasma 6.5 desktop. I also tried with CachyOS, exactly the same behavior there.

Connection via USB:

2026-03-23T10:43:22.512220+01:00 Monolith2 kernel: usb 7-1.4: new full-speed USB device number 14 using xhci_hcd 2026-03-23T10:43:22.636261+01:00 Monolith2 kernel: usb 7-1.4: unable to read config index 0 descriptor/all 2026-03-23T10:43:22.636278+01:00 Monolith2 kernel: usb 7-1.4: can't read configurations, error -71 2026-03-23T10:43:24.015218+01:00 Monolith2 kernel: usb 7-1.4: new full-speed USB device number 16 using xhci_hcd 2026-03-23T10:43:24.130244+01:00 Monolith2 kernel: usb 7-1.4: New USB device found, idVendor=3537, idProduct=1022, bcdDevice= 2.31 2026-03-23T10:43:24.130269+01:00 Monolith2 kernel: usb 7-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 2026-03-23T10:43:24.130271+01:00 Monolith2 kernel: usb 7-1.4: Product: GameSir-G7 Pro 2026-03-23T10:43:24.293224+01:00 Monolith2 kernel: input: GameSir-G7 Pro as /devices/pci0000:00/0000:00:08.3/00 00:08:00.4/usb7/7-1/7-1.4/7-1.4:1.0/0003:3537:1022.000B/input/input48 2026-03-23T10:43:24.294228+01:00 Monolith2 kernel: hid-generic 0003:3537:1022.000B: input,hidraw1: USB HID v1.10 Gamepad [GameSir-G7 Pro] on usb-0000:08:00.4-1.4/input0 2026-03-23T10:43:24.297220+01:00 Monolith2 kernel: hid-generic 0003:3537:1022.000C: ignoring exceeding usage max 2026-03-23T10:43:24.298231+01:00 Monolith2 kernel: input: GameSir-G7 Pro Keyboard as /devices/pci0000:00/0000:00:08.3/0000:08:00.4/usb7/7-1/7-1.4/7-1.4:1.1/0003:3537:1022.000C/input/input49 2026-03-23T10:43:24.385231+01:00 Monolith2 kernel: input: GameSir-G7 Pro Mouse as /devices/pci0000:00/0000:00:08.3/0000:08:00.4/usb7/7-1/7-1.4/7-1.4:1.1/0003:3537:1022.000C/input/input50 2026-03-23T10:43:24.386187+01:00 Monolith2 kernel: hid-generic 0003:3537:1022.000C: input,hiddev0,hidraw2: USB HID v1.10 Keyboard [GameSir-G7 Pro] on usb-0000:08:00.4-1.4/input1 2026-03-23T10:43:24.389828+01:00 Monolith2 mtp-probe: checking bus 7, device 16: "/sys/devices/pci0000:00/0000: 00:08.3/0000:08:00.4/usb7/7-1/7-1.4" 2026-03-23T10:43:24.389970+01:00 Monolith2 mtp-probe: bus: 7, device: 16 was not an MTP device 26-03-23T10:43:24.445880+01:00 Monolith2 mtp-probe: checking bus 7, device 16: "/sys/devices/pci0000:00/0000: 00:08.3/0000:08:00.4/usb7/7-1/7-1.4" 2026-03-23T10:43:24.445943+01:00 Monolith2 mtp-probe: bus: 7, device: 16 was not an MTP device submitted by /u/ostheimm
[link] [comments]

Ok so this one is kinda curious. I upgraded my CPU from an Intel i5-12600 to an AMD Ryzen 7 78003XD. I also have 32GB RAM and a Radeon 9700 16GB GPU.

I use a lot the Steam recording feature. I often play a game for a bit, open the steam overlay, clip a video, export it and continue playing.

With the Intel CPU, the preview of the video was pretty much real time. Now with a much more modern CPU the preview is choppy as hell. When I am outside the game, the recording and the UI for clipping is entirely smooth.

I thought was my Nobara being silly, so I went nuclear and installed CachyOS. The same issue. So this is definitely something beyond my OS installation.

Everything else works super good, great performance.

Anyone knows the reason for this? I already tried enabling/disabling the steam option of `Enable GPU accelerated rendering in web views`

submitted by /u/lechip
[link] [comments]

Guyz... I request you all something. I'm doing light gaming. HP 15 dw3000 laptop, 12GB RAM, i5 1135G7 with Iris Xe Graphics. It handles AC Unity smoothly at lowest available preset.... I guess that shows my setups capabilities. I'm currently using Windows X Lite 23H2 reduced and optimised version which stands @ 3 GB RAM consumption at startup and my laptop is quite fast in general at all times.

What I wanna know is whether jumping to CachyOS or Linux Mint+Xanmod will be better? Or should I stay in this version for now. Because I HATE Windows in any manner.... Except for gaming performance due to lack of dedicated graphic card (No budget guys), I'm staying in Windows now to avoid the Proton usage overhead. But I wanna know whether it will be better.

submitted by /u/Devilmaycry_123
[link] [comments]

so i decided to download nvidia drivers on mint(bad idea)The moment they downloaded my system froze and i decided to do a force reset as it had been stuck for the past 10 mins or so.Now when i turn it on there’s lines across my screen and i can only see the top slither of my “monitor” i did this on a 2012 imac with an intel i5330s and gt 640m.I think this is fixable as this had happened to me before on the same system but i download a different series driver.If anyone could point me in the right direction or help me that would be appreciated.

submitted by /u/Albzzzw
[link] [comments]

Hello. I’ve decided to change to linux recently.

Everything in the game works fine.

But when I wanted to invade, the game just froze and then failed to match me with the host world. I can confirm that everything works okay on the same hardware and Windows 11.

I’m doubting that the vulkan shader is the culprit here, but I’m not sure. I can’t find any post online addressing this issue. I’ve asked Gemini for some help and disabled IPv6 to force the game to use IPv4 for match making. I think that change makes no difference.

Please send help ;-; Any help and recommendations will be appreciated and carefully considered. You guys can see how bad the freeze here.

My OS: Linux 24.04 LTS
My hardware:
- CPU: Ryzen 5 5500
- GPU: RX6600
- Mainboard: B450M-A PRO MAX II

submitted by /u/Carlavier
[link] [comments]

I’m running GTA V on Linux Mint using Wine (cracked version), and I installed ScriptHookV + Menyoo.

ScriptHookV.log and menyooLog.txt are both created, so the mod is clearly loading. The config is also being read (I changed the open_key from F8 to U since I don’t have function keys).

Problem: the menu doesn’t open at all. Pressing U does nothing.

I tested with xev and my keyboard input works fine (U key is detected), but it seems like GTA/Wine is not passing the key input to ScriptHook/Menyoo.

I also tried:

• WINEDLLOVERRIDES="dinput8=n,b"
• launching via PlayGTAV.exe (GTA5.exe is blocked by launcher) (but later on after i installed all the dlls and the asi stuff needed but after that the game wont even launch)
• resetting menyoo config
• virtual desktop (wine explorer /desktop=...), which caused mouse issues but still didn’t fix input

So right now:

• Game doesnt even open :sob:
• very sad
• very very broke
• bored of CS2

Anyone know how to fix input not reaching ScriptHook mods on Wine?

submitted by /u/Spiritual_Mail_8859
[link] [comments]

Hey, I have a weird issue with Overwatch 2 on Linux.

Setup:

• Fedora GNOME (Wayland)
• Steam (native)
• Overwatch 2 via Proton (also tried Proton Experimental)
• PipeWire

Problem:

• Voice chat worked earlier today, now completely broken
• Can’t hear anyone
• Can’t unmute (button does nothing)
• Got error 5027

Important detail:
My mic works fine in Linux, but
👉 Overwatch creates NO recording stream in pavucontrol

So it seems like the game isn’t even opening the mic.

Tried already:

• Restarted PipeWire / WirePlumber
• Verified mic works (arecord)
• Deleted config + full Proton prefix
• Set mic manually via protontricks winecfg
• Switched to Proton Experimental

Current state:

• Voice chat “connects”
• But unmute doesn’t work
• No mic input at all

Anyone seen this or knows a fix?

🙏

submitted by /u/Timon_Roe
[link] [comments]

submitted by /u/TrashSlutArt
[link] [comments]

I played this game more than 7+ hours(Idk why 2 hours is showing) perfectly fine but now it ain't opening I tried with proton experimental but it gives me the error showed in 2nd pic and when I try proton cachy-10.0 steam runtime version it dont even run plz Help me I have tried different proton version but these two error keeps on coming back

submitted by /u/End7t
[link] [comments]

submitted by /u/CobraFTW
[link] [comments]

To make a long story short, I use nobara as an OS and have a Nvidia gpu. Any time I need to use SteamVr instead if using Wivrn for games like Alyx. It connects fine but I get a black and white scrolling mess rather than the game. Anyone else ran into this issue? I've been unable to find anyone with the exact same problem before.

To note, os and drivers are updated and stable I've tried Steamlink and doing it through Wivrn I have uninstalled and reinstalled SteamVr

Any advice would be appreciated!

submitted by /u/Capable_Program805
[link] [comments]

hi! just bought spider-man remastered during the spring sale, but when i downloaded it and went to hit play, it just says "starting..." on steam for a bit before closing. i've tried proton 8-10, experimental, ge, etc. i've tried every set of launch options on protondb. proton 8&9 at least gives me this error:

https://preview.redd.it/71xo4bxe1qqg1.png?width=676&format=png&auto=webp&s=927f7464673f63308b7f905b7bf815a4b97b83b1

that drive is my sd card, but i uninstalled the game from it and reinstalled on my main drive in case that was the problem. only proton 8&9 give this, 10 and ge and experimental just close randomly. i've tried dismounting the sd card, but the error persists. i've also tried verifying the files and like i said, reinstalling.

i'm on a steam deck running stock endeavouros (hence why i'm here and not the steamdeck subreddit, just mentioning it for hardware reasons). does anyone know what to do here? i'd really really like to play spider-man, but i just can't figure out what to do.

EDIT: kept messing around with proton versions and launch settings, went to proton-ge and tried putting in the logging launch option... only for it to boot up perfectly. i think i scared it into working? cool!

submitted by /u/GenoIsDead
[link] [comments]

Hey y'all, how's it going. So, I recently came to Linux after having been a windows gamer my whole life, some things have been fun and others have been... decidedly less, haha. I have been trying to play Space Marine 2 and Monster Hunter Wilds, but I am running into a problem where they both run extremely slow, are slow to receive inputs, crash after about a minute, and the lighting is all weird. I have spent about a week trying to find fixes, trying different versions of Proton, and checking my drivers, and I honestly don't know what to do. Does anyone have any ideas? I figured it would take more setup but once it was working it would feel like gaming on windows, am I just wrong?

Edit: My distro is Ubuntu 25.10,

I am running all my games of steam Steam, using GE-Proton10-33 specifically for MHWilds

My hardware is an Intel Core Ultra 9processor, with an Nvidia 5070 Ti

Thank you for any and all ideas!

submitted by /u/JustJoBroskie
[link] [comments]

I recently switched back to Linux Mint after living with Windows on my new laptop for a few months. I do have a little experience with Linux, but not with gaming. After finally successfully installing Linux Mint and the 580 Nvidia drivers, I tried to install some games which ran fine on Windows. With Minecraft, it was using the integrated graphics so I put env DRI_PRIME=1 as a before startup command in the launcher (ATLauncher, if that matters). But instead of switching to the dedicated GPU, it instead was using "llvmpipe" graphics, which after a quick google search told me that it was trying to use the GPU, but there was something wrong with the drivers. With the Cities Skylines 2, the other game I tried, it would load into the game and then crash after trying to load into a save. I tried the 590, 570, and 535 drivers with the same results for both games. But when I tried the open-source driver, Minecraft ran fine, but when I opened steam it was a pixely mess, and same with directly running CS2. I tried a bunch of different kernels and they all just made my computer freeze on startup or they disabled my internet. I have no idea what is going on and I would love some suggestions,

If you couldn't tell, my method for troubleshooting is messing with a bunch of random stuff and hoping it works. I also don't know much about Linux and the vocabulary around it.

OS: Linux Mint 22.3 Zena

CPU: AMD Ryzen 7 7445HS

GPU: RTX 4050 Mobile

RAM: 16GB

submitted by /u/xxmultiplex
[link] [comments]

So im kind of new to PC gaming and such. I finished my build not too long ago, and been playing a few games off my backlog. Alot of the newer games I want to play have denuvo, and I heard horror stories of how it can sometimes operate at kernel level and slow down your PC, even when you arent playing the game. My PC is very expensive, I bought all the parts myself and put it all together, so im kind of attached/paranoid about adding unwanted programs and services that slow it down. While I get linux is different than windows, and bazzite linux is even more picky when it comes to application access, I just wanted to know if denuvo is something I should be worried about? Would it help to use flatpak versions of steam, or does it not matter and im just dumb af?

submitted by /u/BloodMoonWillows
[link] [comments]

Heyo, I recently got an Elgato 4k S to use to screenshare my switch on discord. For the most part it works fine, with one glaring exception:

After using it, if I remove the source from OBS, close OBS, or otherwise close the feed from the card, it will refuse to open the next time I try. To work around this, I have to unload/reload the uvcvideo kernel module.

I can tick the OBS setting to reset the device whenever it times-out, but this leads to microstuttering. [After some testing, it seems I can tick this option to reset it, untick it, then restart OBS to get it working again]

I'm just wondering if anyone else has use with this device, and if/how they've been able to work around these issues, if possible. It's not a deal breaker if there's no solution, but it is annoying.

From what I can tell, it's not an issue with OBS, since I got similar issues when testing with VLC.

submitted by /u/AeskulS
[link] [comments]

submitted by /u/ChrisTheMagicFan
[link] [comments]