Splatterbot is one you're going to need to stick into your party game rotation, with up to four players trying to make the biggest possible mess.

.

Read the full article on GamingOnLinux.

I have some questions about this controller. I use Debian 13 BTW. I have not used a controller in like 10 years and never used one on pc so I am a complete noob when it comes to controllers.

I am looking to play some old lego games like lego city undercover which have horrible keyboard support. I am going to add these games to steam as a non steam game or ran in bottles (definitely not forced free licensed "open source" software).

1. I am assuming it works with normal steam, is that correct?
2. Does it work with the flatpak version of steam?
3. Does it work in flatpak bottles out of the box? If not is it possible to get it to work?
4. Anything else I should be aware of as a controller noob?

submitted by /u/trihexhunter
[link] [comments]

Hello to all the community!

So, I come here because I have a problem, I'm trying to adjust the RGB on my config. So I installed the experimental version from the official OpenRGB website (appimage). I can run it without sudo but it only displays and controls the RGB of the graphics card (3080FE). So I wanted to run it using sudo and I got this error (see photo). I try Do a grep | display as you can see in the photo and everything looks correct so I don't understand lol. I tried with the pacman version before it did the same so it's not a problem linked to the Appimage. The other applications work well, I use Steam, LM-Studio, Librewolf, I have never had this problem...

Here are my specifications:

Case: BeQuiet! Light Base 900DX

Motherboard: Aorus B850 Elite Ice

Processor: AMD Ryzen 7700

Graphics Card: NVIDIA GeForce RTX 3080 Founder Edition

RAM: Kingston Fury Beast RGB (32GB) - 16x2

SSD: SK-Hynix Platinium P41 (1TB)

CPU cooler: Arctic Liquid Freezer III 360mm

Fan :

Arctic P12 120mm (HIGH - AIO)

Phanteks P30 140mm Reverse Blade (Side and Bottom)

Phanteks P30 140mm Regular (Rear)

Power supply: Lian-li Edge 850W Platinum

Screen: HyperX Armada 27" (165Hz - 1440p)

Keyboard: Rog Azoth Moonlight

Mouse: Roccat Kone Aimo Remastered

I would like to control the RGB without having to download Windows or access the bios (it doesn't have the option anyway apparently). I also want the RGB music visualizer because it looks cool. But my first objective is that it detects all my RGB devices including my motherboard... (I hope very much because I know that with Gigabyte it's hard)... Afterwards I saw no one talking about my motherboard with OpenRGB so I don't know if it works or not (even experimental)... But already I would like to be able to start OpenRGB in Root to test (hoping not to damage my hardware because it scares all the stories from some people!).

Any help is appreciated, Thank you in advance!

Sincerely,

submitted by /u/HarleyTheShepherd
[link] [comments]

https://preview.redd.it/znuwgd5e9zif1.png?width=1920&format=png&auto=webp&s=384d2ba7d6889081e5c612eacdb24abecbac3ef7

help me with ubisoft connect please. im trying to play WD on arch, im using GE-Proton 9 on it. i just login normaly to UC but they gave me message "connection lost" "A ubisoft service is curently unavailable. Please try again leter." and if i click the Try Again button its just stuck on "initializing..." just like in the photo. any solution?

submitted by /u/OctaviusRmdh
[link] [comments]

You know the things like steam tinker launch, Heroic Games Launcher, Lutris... I use none of them because I wanted a simple setup.

I installed battle net launcher by adding the installer to steam as a non-steam game, then I just had to re-launch the installer to launch the launcher. I was like, the games won't start right? Well, they do start without additional efforts.

I then installed epic games launcher the same way, but this time I copied the launcher to ~/Applications to tidy things a bit, removed the installed from steam and added the launcher instead.
Once again, games are working without effort.

On the internet, almost all the tutorials tells us to install one of the tool I talked about above, to use epic launcher, but I don't understand why. Steam itself is powerfull enough to use almost any windows program. I used it to install PowerISO because their native linux version was not working, for example.

I did not find ANY game that would not run on linux, that's really impressive... Sometimes you have performances troubles, but you can almost always fix them.

Thank you, steam, for making a linux game console that forced you to work on game compatibility on linux !

submitted by /u/Useful-Assumption131
[link] [comments]

Hello,

I'd like to change my distribution to something more powerful for gaming (and potentially which will not crash when I want to customize a little and because I know Mint isn't that great for gaming). I've read a few things here and there, especially the FAQ, and I'm still not sure. I can't really use gaming distros like Bazzite or Nobara since I'm a student and need development tools.

I'm attaching my configuration if it helps.

Anyway, if you have any advice or feedback, I'd be grateful. Thank you.

https://preview.redd.it/znr4czi37zif1.png?width=843&format=png&auto=webp&s=2ae25edbcda94c52f419e51d452937c4adc258ec

submitted by /u/hiro_1301
[link] [comments]

i tried looking around for this answer but found conflicting info

i first read that gsync doesnt exist on wayland and only x11 because nvidia hasnt prioritized porting gsync to wayland yet, hence the "nvidia x server settings" being pretty barebones on wayland compared to x11

i then read somewhere else that gsync only works if you have one monitor active, regardless of whether x11 or wayland is used, but that this would be fixed in an upcoming nvidia driver? not sure what the current status of this situation is

i did some digging in the KDE settings on my own and found a setting called "adaptive sync" for my primary monitor with the options "never", "automatic", and "always". theres also a setting called "screen tearing" at the bottom of the page. i dont know why its enabled by default nor the option to allow screen tearing exists to begin with. arent we trying to mitigate screen tearing when gaming? both of these options are under "display configuration" in KDE

id appreciate a definitive answer as to how i can enable gsync here because im genuinely confused after i did my own research.

as a side note, i know blur busters recommends to enable gsync and enable vsync globally in the nvcp in windows, and im wondering if theres an equivalent setup on bazzite.

tl;dr i did my own research and got even more confused on how to enable gsync, if its even possible to begin with

submitted by /u/DeliciousCulture339
[link] [comments]

The title essentially.

I tried GE Proton 8-16 which works fine, but lacks behind the newer ones. So does anyone know what the best latest Proton is that Genshin works with?

Also someone said GE Proton 10-10 works, but sadly that didn't did I maybe do something wrong?

Game is installed via Lutris with the official game launcher

submitted by /u/Meowthemeoweth
[link] [comments]

While there's still no clear release date yet, The Jackbox Party Pack 11 is shaping up to be quite a fun looking set.

.

Read the full article on GamingOnLinux.

I'm having to be steadily more careful on what I choose to cover here on GamingOnLinux, with more games releasing using generative AI.

.

Read the full article on GamingOnLinux.

Just curious as to whether anyone else has experienced the same issue.

The game seems to work fine with Proton but I'd like to see if I can get the native build to work properly.

-----------

System Details:

OS: Fedora Linux 42 (KDE Plasma Desktop Edition) x86_64

Kernel: Linux 6.15.9-201.fc42.x86_64

DE: KDE Plasma 6.4.4

CPU: AMD Ryzen 7 7800X3D (16) @ 5.02 GHz

GPU: NVIDIA GeForce RTX 4090 [Discrete]

-------
NVIDIA-SMI version : 580.76.05
NVML version : 580.76
DRIVER version : 580.76.05
CUDA Version : 13.0

--------------

Launch + Termination Logs

./start.sh
Running Tyranny
Set current directory to /mnt/x24/Games/GOG/Tyranny/game
Found path: /mnt/x24/Games/GOG/Tyranny/game/Tyranny.x86_64
Mono path[0] = '/mnt/x24/Games/GOG/Tyranny/game/Tyranny_Data/Managed'
Mono path[1] = '/mnt/x24/Games/GOG/Tyranny/game/Tyranny_Data/Mono'
Mono config path = '/mnt/x24/Games/GOG/Tyranny/game/Tyranny_Data/Mono/etc'
displaymanager : xrandr version warning. 1.6
client has 2 screens
displaymanager screen (0)(HDMI-A-1): 3840 x 2160
displaymanager screen (1)(DP-3): 3840 x 2160
Using libudev for joystick management

Importing game controller configs
Terminated

---------------

Edit: Wtf....there's no black screen if I launch the game with zink?

Why would that even work?

submitted by /u/slickyeat
[link] [comments]

submitted by /u/beer120
[link] [comments]

After some setbacks, Pixeljam are readying a fresh Kickstarter to help fund the prehistoric multiplayer racing platformer Dino Run 2, along with a fresh demo.

.

Read the full article on GamingOnLinux.

A PlayStation classic returns. The shoot 'em up R-Type Delta: HD Boosted was announced with a PC release coming in November.

.

Read the full article on GamingOnLinux.

Ive been looking around but i cant seem to find anything online on how to fix this weird graphical square shadow issue. Also have the same issue with payday 3 and not just this game. Running catchyos on a rx 9070

submitted by /u/Madtech-
[link] [comments]

I've been playing Monster Hunter Wilds for about a month with a 16GB RX 9060 XT, and overall I haven’t had many issues.

When I enable FSR 4 with the following command: PROTON_FSR4_UPGRADE=1 DRI_PRIME=1 gamemoderun MANGOHUD=1 %command% and GE proton

The FSR version shown is 4.0.0 on Linux.
However, on Windows the game shows 4.0.1, so it seems the game does support the newer version.
I’m wondering if this is a driver-related issue on Linux or if there’s another reason why it’s not loading FSR 4.0.1 here.

submitted by /u/daeduol
[link] [comments]

So I am a long time linux user. That's not to say that I'm an expert in linux, not by a long shot. I can usually figure out or find the answers to things thanks to running Arch for about 2 years until I got tired of something going wrong and breaking something (surely because of me).

I've been hearing that Linux has now come a long way into gaming and I for one want to support it but NO LONGER running windows because FUK WINDOWS which is a cancer.

Now that rants over. I recently installed Pop!_OS because I wanted a more Debian stability over Arch. (I'm sure I will get hate for that, whatever your experience will differ) I started off with using Bottles to install WoW.

Problem 1: Got it installed running the latest proton runner and it was working fine until I actually started fighting. That's when the frame rate dropped so drastically that it became unplayable. Once I got out of combat it was back to being smooth (arguably smoother than windows) I tried to lower the graphics and all that, but no cigar.

Problem 2. I then tried to load it with Lutris and the agent doesnt just freeze it won't even get to the WoW launcher without error-ing out and failing.

Problem 3: Not to mention I can't get my Logictech G502 x to work with piper or any other mouse program made to solve this and forget about the Razer Tartarus Pro, that's not recognized by openrazer or Polychromatic (unsupported device 1532:0244)

So here I am. Hoping someone online can help run this on my PC that's AMD CPU & GPU. I don't want to go back to windows because I have hated Microsoft for YEARS now. But what else can I do to game?? I want that flawless experience a lot of gamers are having on linux.

submitted by /u/Dontpanic_x
[link] [comments]

I have this video "rendering" / "no signal effect" issue on Bazzite on the Legion Go. It mainly occurs during cutscenes, while there are no problems during gameplay.

I also tried using Proton GE 10-12, but it still doesn’t work and gives the same problem as other Proton versions.

submitted by /u/Ok_Athlete_9096
[link] [comments]

I have a terrible power loss compared to the Ubuntu I used before. What can I do to make it work like before? In the Pop OS Shop, I noticed that everything loads very slowly and when I started Forza Horizon 4, there was a message that the power was lower than the minimum. The game started anyway, but quickly shut down while loading submitted by /u/Funny-Scarcity-674
[link] [comments]

submitted by /u/Inside-Smell-2047
[link] [comments]