Is anybody still getting regular crashes on Rivals with Nvidia cards? I have a machine with an AMD card but its currently down at the moment so this is just a backup one.

Backup rig specs, currently on Bazzite
5600G
32GB RAM

3060 GPU

I have tried different proton versions, different startup commands, checking drivers, and I still can't get more than 15 min out of this game without it hard crashing, sometimes even requiring a reboot.

submitted by /u/Aretebeliever
[link] [comments]

What is an usual delay between release of Nvidia drivers and it's being available on Arch or other bleeding edge distros?

submitted by /u/liquidsnake171
[link] [comments]

submitted by /u/Putrid_Draft378
[link] [comments]

Hi, i've been getting some screen flickering issues recently with bazzite. I have a 2k 165hz screen and while on desktop or in game when nothing was happening and my FPS would go beyond 165 even though its capped my screen would start to flicker. I've solved that by going to system settings and setting adaptive synchronization from "ON" to "Automatic".

Now i'm getting issues with VRR and freesync in games that are not exclusive fullscreen and since i have 3 screens, i'm not running anything in fullscreen mode and everything is a stuttery mess because of it.
I'm playing world of warcraft in Fullscreen (windowed) because there is no fullscreen in the settings, i managed to get lutris -> bnet -> wow.exe working through gamescope with VRR enabled, terminal says that VRR is enabled but it clearly isnt, because the game visibly stutters.

My other screens are 2k 144hz and they dont have the flickering issue no matter the settings. The monitor that is causing issues is working fine on MAC and WINDOWS with HDMI 2.1 cable and with DP 1.4 cable.

My question is - Where should i look for a problem?
I have no clue from which directon to tackle this. I've managed to somewhat solve it but it is very far from ideal. I have Lutris running through gamescope from the terminal. Lutris is running Battle.net which i use to launch wow with custom command to launch it in fullscreen. When i check ingame settings it's still Fullscreen (windowed) just like before but now VRR is visibly working. FPS are jumping up and down yet the screen is not stuttering, nor flickering, but i don't want to launch lutris through terminal.

Thanks to anyone who finds a while to help.

submitted by /u/Ritchie01
[link] [comments]

Same distro, same kernel, same compatibility tool… yet somehow I’m getting noticeably lower FPS on KDE compared to GNOME. Anyone know what’s going on here?

• GPU: 6600 XT
• CPU: Ryzen 5 3600
• RAM: 16GB DDR4 3600MHz
• Distro: CachyOS
• Kernel: 6.16.0-5-cachyos
• Compatibility Tool: GE-Proton10-10
• Display Server: Wayland

submitted by /u/Frequent-Trifle-4093
[link] [comments]

Just got back from a week away from my house. Before I left I could run Garry's Mod just fine on my computer, during the trip I played it a bit on my Windows 11 laptop [I'd rather switch but Windows is easier for my mum who I share it with], and now it won't run on my Mint machine; it takes upwards of half an hour to process the vulkan shaders, and skipping that process causes the game to not launch. I am not willing to spend so long waiting just to run GMod when it worked fine before...

I've tried removing any addons I subscribed to on the trip, it doesn't help.

Searching online for this issue didn't help either; the fix that came up was this but I couldn't use it as I don't have a Steam folder in either of the locations it specifies, mine is located directly on the "home" section of the file explorer, and putting the c.cfg in it didn't have any effect.

What should I do?

submitted by /u/piratequeenkip
[link] [comments]

The game is Monster Hunter Wilds.

Every time I restart my PC and start Steam it starts validating the game. Not only does it say Validating it also just downloads 2GB of data simultaneously. I already manually validated and I don't know why this keeps on happening. Does anyone have a clue? I am on Fedora and downloaded Steam via RPM Fusion repo.

submitted by /u/R4pidFire
[link] [comments]

I bought an HP omnibook x flip 14 for college. Ive been using linux on my desktop for over a year and have just gotten used to, using windows frustrates me too much. There are a few games i want to play, namely Marvel rivals, clair obscur expedition 33, persona 5, nier. On my desktop (i7 10700k, rx 6700xt), the performance is significantly better, less framedrops, sometimes much higher fps.

I do want to squeeze out as much performance I can, starting with a much lighter OS. I don't know if the performance is really better on linux, due to drivers, Ive read online that windows offers better performance due to up to date drivers. If anyone is using the arc 140v on linux, can you give me some insights and some bechmarks (in any games, just to see differences if any)

submitted by /u/xTHEFLASH0504x
[link] [comments]

Anyone here who had problem with gamepad Gamesir G7 Pro or any other gamepad that it doesn't work in game? It works in steam big picture mode but not in game. It works perfectly fine with cable just not when it's connected through dongle or bluetooth.

submitted by /u/FeelsGoodBlok
[link] [comments]

I just cannot get them to go to the mod organizer’s downloads no matter what I do.

For the automatic installation, I have all my nexus settings set up correctly to my knowledge. It does seem all the files associated with NXM files are there, though they don’t run when I click on them and I do not know if that is normal. Despite that, whenever I try to download with mod manager on Nexus, it gives a pop up asking which program I want to open it with. I don’t have anything in the server boxes, so that might be why, but I truly do not know.

For manual installation, I just cannot click and drag files from Dolphin into the downloads box for whatever reason. I can click and drag the files elsewhere, but it does not allow them to go into the manager. I have tried this with folders containing the individual mods and the files within the folders, neither of which work.

Is there any way to fix this or should I just reinstall?

submitted by /u/Pouring-O
[link] [comments]

AMD Desktop System Setup Guide for Gaming on Arch Linux

A (slightly) opinionated setup guide for getting started with gaming on Arch Linux (Should be fully applicable to its derivatives as well) for AMD GPUs.

Preface

If you’re using the archinstall script to install Arch, make sure to enable the following during setup:

PipeWire

Zen Kernel

Swap

Multilib Repository

GNOME or Plasma Desktop Environment (Optional, but preferred for gaming thanks to Wayland)

This will save time later.

Display Server

Preferably use Wayland over x11, it is the future and more modern. Do still keep an x11 session handy just in case.

Recommended Wayland desktops: KDE Plasma and GNOME.

2. Kernel & Audio

The Zen Kernel offers better responsiveness, especially for gaming.

Pipewire is a modern audio system that handles both pro audio and gaming latency well.

3. Enable Multilib Repository in the Pacman Conf

This is required for 32-bit compatibility, which some games and Steam depend on.

4. Install an AUR Helper

Use an AUR helper to install community packages. Paru is recommended over Yay for its sane defaults and easier customization. Also remember the dangers of using the AUR, audit the PKG builds whenever updates roll out, Paru forces you to do this.

Important Packages via AUR:

protontricks – Easily manage Proton prefixes

proton-ge – Community-maintained Proton build with improved compatibility

Optional Tools:

jdownloader2 – Useful for downloading large files from the internet, pick jre17-openjdk when prompted.

nexusmods-app – For modding official copies of these games:

Stardew Valley

Cyberpunk 2077

The Witcher 3 (Coming in the future)

Mount & Blade II: Bannerlord (Kinda works, not fully supported yet)

Bethesda titles (Coming in the future)

Baldur’s Gate 3 (Kinda works, not fully supported yet but full support is coming next)

5. Gaming & System Tools

Install these packages to enhance performance, game compatibility, and system control:

gamescope – Game-focused Wayland session

gamemode & lib32-gamemode – Boosts system performance while gaming

goverlay – GUI for managing mangohud

mangohud – Performance overlay (FPS, temps, etc.)

lutris – Very configurable game launcher

steam – Pick Vulkan-Radeon when prompted for the Vulkan driver

umu-launcher – Required for using Proton via Lutris

prismlauncher – Essential for Minecraft, especially for modding. Pick jre17-openjdk when prompted.

wine-staging + wine-gecko / wine-mono dependencies – For running Windows games

winetricks – Configure Wine with ease on Lutris

qemu-full, virt-manager, libvirt – For running VMs

flatpak – Not recommended due to sand boxing issues, but useful for some tools such as Limo, which is a Linux native mod manager. (Nexusmods app is better, but that only fully works with 2 games at the moment)

power-profiles-daemon – Easy power management tuning if you went with KDE Plasma.

corectrl – Overclock your GPU for more performance. Remember to double check the entered values, as mistakes might instantly cause fatal hardware damage.

Web browser of your choice

6. Browser Recommendations

Chromium-Based:

Vivaldi – Very customizable

Brave – Slightly lighter than Vivaldi (AUR)

Gecko-Based:

Firefox – Standard, useful for minimizing AUR packages while using Gecko

Floorp – Extra customization (AUR)

Librewolf – Minimal and clean (AUR)

7. Initial App Setup

Launch Steam and Lutris to let them initialize properly.

In Steam, set Proton Experimental as the default compatibility layer.

In Lutris, enable Gamemode, Gamescope, and Mangohud in global settings.

Install wine-ge-8-26 within Lutris settings as its the default recommended runner there.

8. System Tweaks

Add yourself to the gamemode group to allow Gamemode to function.

Use CoreCtrl for GPU overclocking, remember to disable processor tuning in the app as it will conflict with Gamemode. And again, read this carefully.

Configure Mangohud using Goverlay, at minimum enable "Global enable" and "Hide by default".

9. Virtual Machine Setup (for Niche or Legacy Games)

Enable the libvirt service and add yourself to the libvirt group.

Open Virt-Manager and set up a Windows 10/11 LTSC virtual machine for games that just won’t run on Linux. (Double check if they will even run on virtual machines)

10. Reboot

Great, everything should work now! Now its time to finally install some games.

Optional: Audio Enhancements

Install JamesDSP (AUR) and realtime-privileges.

Add yourself to the realtime group.

Use the AutoEQ website to create a .wav profile for your headphones and load it in the JamesDSP convolver.

Enable Bass Enhancement (At the lowest setting).

Set the Equalizer to the “Clear” preset.

Enable the Convolver.

Extra Tips

btop – A great alternative to Task Manager on Linux.

rocm-smi-lib – Optional dependency for btop to monitor your AMD GPU on top of your CPU.

openrgb – Full control over RGB lighting (if supported).

Final Note

This guide is meant to point you in the right direction, not hold your hand.

Use the official Arch Wiki to fill in the blanks, here are some helpful articles.

Archinstall script

Gaming

Virtual machines.

Desktop environments

Corectrl

submitted by /u/cattywampus1551
[link] [comments]

submitted by /u/shawn_blackk
[link] [comments]

I understand the sentiment around here is "fuck kernel level anticheat" and as a newbie into this space im starting to grasp at allbeit a surface level why this is a problem. this post is more aimed at the people like myself who still want to play those games yet dislike the OS your forced to play them on. is dual booting worth it? do VMs work? or is it just a case of stay with windows/macOS or drop the game entirely?

submitted by /u/Runescapelegend778
[link] [comments]

1. How does DRI_PRIME even work with Nvidia proprietary drivers?
2. Why does it start using Zink?
3. How is Zink even used with Nvidia proprietary drivers?
4. Why doesn't it work if the game uses Wayland? (it's not on the video, but I tested with Barony and in Wayland mode it just uses llvm pipe)

I was just testing DRI_PRIME variable and randomly discovered that for Xwayland OpenGL games it forces use of my Nvidia GPU and somehow switches renderer to Zink while still using Nvidia proprietary drivers (according to mangohud).

│ System Information │ 󰍹 OS Arch Linux x86_64 │ 󰒋 Kernel Linux 6.15.9-zen1-1-zen │ Hardware Information │ 󰻠 CPU AMD Ryzen 5 5600H (12) @ 4.28 GHz │ 󰢮 GPU NVIDIA GeForce RTX 3060 Mobile [Discrete] (nvidia-dkms 575.64.05) │ 󰢮 GPU AMD Radeon Vega Mobile Series [Integrated] (mesa 25.1.7)

PS: Sorry for the yellow-ish video, GSR for some reason records Plasma's night mode.

submitted by /u/Damglador
[link] [comments]

I mainly play my gog games through lutris or heroic but it will also happen with steam games too. Anytime I have it mirrored to the TV.

I'm a noob who recently switched over from windows. Back when I played on windows I liked to mirror it so that friends and family can enjoy the back n forth of watching each other playing single player games.

If there's no fix I may just use sunshine moonlight. I'm loving loonix asides from this issue.

Right now the best way to prolong the crash seems to be using xcfe on 60 fps on both monitors. It still ends up crashing then but takes longer for it to.

Forgive me if there's some glaring obvious answer my nooby self didn't find.

submitted by /u/Dismal_Bad7801
[link] [comments]

submitted by /u/Lawstorant
[link] [comments]

Hi,

Has anyone been able to succesfully mod Pathfinder: WOTR in Linux Mint? I tried using Unity Mod Manager added as a non-Steam game running Proton and it even says "Installed", but then it keeps reporting "Access denied" when I try to add mods. I can straight-up extract mods into the Mods folder after UMM installation and they even show up in UMM. However, UMM and the mods don't load up when I start WOTR.

This is strange to me because I used this method when modding Pathfinder: Kingmaker in Fedora 42 and it worked well so it must be some distro difference. And yes, I did take ownership of all non-root drives and even reinstalled the game on the same disk as the UMM.

Would appreciate any help. Thanks!

submitted by /u/Envision0095
[link] [comments]

I knew the game ran in the past without a problem, I wanted to get back into it after the new update so I re-downloaded it and it is not working. I boot up and get into the title screen and it will not let me sign into my Microsoft account. There's a spinning wheel after you hit enter and nothing pops up. Does anyone have any idea of the fix this?

I'm running cachyos

Thanks in advance!

submitted by /u/mcconn98
[link] [comments]

Title

submitted by /u/Ill-Kale-2468
[link] [comments]

I am currently running Windows 11 on my gaming PC. For a while I've been thinking of moving to Linux for it. I'm not a complete idiot but I would like a guide and guidance on getting it working.

I use Steam, Epic Games, and GOG for my launchers. I know Steam has Proton but I haven't looked at how to install Steam games with it. How difficult will it be in getting my games from Epic Games and GOG to run under Proton?

I also use Vortex from NexusMods to mod a few games, Cyberpunk 2077 & Oblivion Remastered. How difficult is it getting that set up?

Thanks in advance.

submitted by /u/Jonr1138
[link] [comments]