I'm on Manjaro and I'm trying to use reshade with gog games via Heroic Launcher. All guides I can find are incomplete, as in there is no step by step setup for it, anywhere. No Reddit, not Youtube, not in any forums I can find. In Heroic there is a Gamescope section where you can set commands.

submitted by /u/Inceleron_Processor
[link] [comments]

I been researching for the past hours about which linux OS to install and I'm not sure which to choose, I'm not making the switch fully but since a have a 480gb SSD that i dont use i want to install linux there and use is for gaming mostly.

I was thinking of using of the following OS:

-Ubuntu 24.04.2 LTS
-Kubuntu 24.04.2 LTS
-Fedora Workstation 42
-Linux Mint 22.1 Cinnamon Edition

I choose these since i believe this four are the most user-friendly OS to start learning and using linux but before going for one of them i wanted to ask about opinion of which of them any of you recommend and which of them have better compatibility for a AMD GPU user (6700xt)

submitted by /u/CapitalShock
[link] [comments]

When trying to connect a Nintendo Pro Controller or a Joycon via bluetooth (by pressing the "sync" button on the back), its lights blink for a pretty long while. After that, it briefly shows up between the connected devices, before returning Failed to connect: org.bluez.Error.Failed br-connection-create-socket on both bluetoothctl and the Bluetooth settings.

Furthermore, trying to connect the controller while running journalctl -f shows the error: bluedevil-wizard[11248]: kf.bluezqt: PendingCall Error: "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."

Both hid_nintendo and joycond are running (I did install hid-nintendo-nso-dkms without conflict alerts, which surprised me since hid_nintendo should be included in linux_headers). Also, 60-steam-input.rules, 71-nintendo-controllers.rules, and 72-joycond.rules are all in /usr/lib/udev/rules.d.

I'm currently running:

• 6.15.8-arch1-2
• KDE Plasma 6.4.3
• bluez 5.83-1

It should be noted that connecting the same controller with a cable works without issues.

Please let me know if there is any other info I can provide, or anything else I could try. I've been wrapping my head around this for quite a while, but I still can't figure out what is causing this problem.

submitted by /u/RedNinja0731
[link] [comments]

At a time where supporting creators of anything that might be deemed adult content or NSFW is more important than ever, the Queer Games Bundle 2025 is live.

.

Read the full article on GamingOnLinux.

I use a gaming laptop. It is the Zephyrus G16. Assus ROG.

This laptop uses Armoury Crate for adjusting the laptop to be on silent, performance and turbo mode. The basic setting manager for gaming laptops. However armoury crate isn't applicable with Linux

Is there any other alternative?

submitted by /u/Xepriea
[link] [comments]

ZOOM Platform that sell a lot of retro games, as well as publish upgrades for games, announced they've also been a target of payment processors for adult games.

.

Read the full article on GamingOnLinux.

A fresh upgrade to the Heroes of Might and Magic 2 game engine fheroes2.

.

Read the full article on GamingOnLinux.

I'm playing little nightmares 2 via lutris proton experimental on fedora kde. My system specs is i5 10thgen, 16gb ram, uhd iGPU. My average fps is 10fps this is already on low quality and 1368x768 resolution. I'm asking maybe if there's something wrong on how i configure this? or maybe my specs is the problem itself. I play genshin in low quality also but i am able to play at 60fps there in which genshin is such a large game (maybe genshin itself is more optimized which is why its playable on my specs??). I also played little nightmares 1 on my old i3 3rd gen 12gb ram iGPU laptop (Windows) in lower res but it plays more smoother than this (maybe ln 1 is more light than ln2?) or maybe its not that optimized for linux since when i played ln1 it was on windows. Just want to hear some insights before i delete it if theres no other way. Thanks for hearing me out!

submitted by /u/ImportantAd8680
[link] [comments]

Hello, I have a laptop with integrated graphics and an nvidia 3050, I'm trying to use heroic, and even though I enabled use dedicated GPU, it's using the integrated GPU, when I added DXVK_FILTER_DEVICE_NAME=NVIDIA GeForce RTX 3050 Laptop GPU. Instead of running the game, I get this:

A D3D11-compatible GPU (Feature Level 11.0, Shader Model 5.0) is required to run the engine.

with a black bar underneath.

I'm using proton experimental.

here is my nixos config: nixos

submitted by /u/bananaboy319
[link] [comments]

i know a good bit about linux and i like the look of fedora so i plan on using it, i have a rx 7900 xtx and a 9800 x3d cpu which will perform better, windows 11 or linux?

submitted by /u/Bluntsei
[link] [comments]

I switched to Fedora mid dev without major issues.

It'll come out for Steam OS and Windows (runs flawlessly on my Desktop of course).

Wishlist and liek if you like blowing up stuff!

submitted by /u/sid-8
[link] [comments]

submitted by /u/_ayagames_
[link] [comments]

Someone in PUBG PC discord server requested for linux support. We have 344K members, if only half of us go and comment there probably they will notice. I am sharing the thread link.

https://discord.com/channels/207018395139309569/1302498774718877707

submitted by /u/aliyark145
[link] [comments]

hey y'all, I am trying to get into game development with unity. I installed the unity hub and visual studio code from flathub however whenever i attempt to edit a script i consistently get the error message "The dotnet6 and mono6 SDK extensions are required for the Unity debugger to work. Please install it from flathub." Ive installed almost every version of both from flathub using the konsole and still cant get past the error. Im a bit of a noob with linux so any advice would be appreciated greatly!

submitted by /u/bobby12341
[link] [comments]

I just started using Linux and don’t know which one I should use. I currently have Ubuntu, and with wine it works fine. But I don’t know which one would be best 🤷‍♂️

submitted by /u/Medium-Finish7640
[link] [comments]

I have dependancy on windows os . I have one system with graphics card. Which linux os is best for gaming and have windows too installed inside it to run both.

Windows 11 is taking away lot of resources and heavy background processes even while playing games.

Have 9060xt 16gb with 5600g b550 msi. Ya it's low processor etc. but can't upgrade my pc any sooner

submitted by /u/BranchSevere1219
[link] [comments]

Hi,

So, I'm a big fan of Owlcat's Pathfinder and WH40K: Rogue Trader CRPGs. I previously played them on Windows, and experienced few issues. While the games also function for a time on Linux, I have a persistant crash in both Pathfinder: Wrath of the Righteous and Warhammer 40,000: Rogue Trader linked to specific cutscenes that play early on in each game.

In the case of WOTR, the game will function fine throughout character creation, and through the first cutscene where Terendelev heals the player character. The festival segment at the start is fully playable, and there are no noticable performance issues or graphical anomalies. However, when gameplay transitions seamlessly to the cutscene of the festival being interrupted by a demonic invasion, the screen freezes, the audio continues to play, and the game will inevitably either crash to boot or (in very rare cases) simply crash to desktop. Not only is the game locked up, but the OS also appears to lock up, and upon restart if the entire system crashed, my NVIDIA graphics driver will cease to function until my PC is restarted a second time (notably, Firefox will refuse to launch, citing a driver error). This issue does not seem to persist past a second reboot.

A similar issue also happens with Rogue Trader, although it is linked to a different cutscene that is much further into the game. I thought this might be linked to the camera being moved around, but Rogue Trader features a sweeping camera shot of the interior of the ship you start the game aboard before you take control, and while there is a brief fade to black in between the segments, the game does not crash like it does with the seamless transition from gameplay to cutscene in WOTR. However, the game will always crash at the same point when you investigate the Rogue Trader's quarters and find her dead, at which point the exact same issue will occur, including the failure of the driver.

I have so far tried a number of fixes, including one fix that worked for a time on Rogue Trader, but did not seem to work when applied to WOTR. I wrote a guide detailing my methodology on Steam, linked here: https://steamcommunity.com/sharedfiles/filedetails/?id=3414770147 . However, at some point between then and now, something has changed with either my system or during one of the updates that has been pushed to the game due to the launch of the Lex Imperialis expansion causing the fix to stop working. I have been running the game in GE-Proton-9, with the launch flags specified in my guide.

My system specs are as follows:

System:

Kernel: 6.8.0-71-generic arch: x86_64 bits: 64 compiler: gcc v: 13.3.0 clocksource: tsc

Desktop: Cinnamon v: 6.2.9 tk: GTK v: 3.24.41 wm: Muffin v: 6.2.0 vt: 7 dm: LightDM v: 1.30.0

Distro: Linux Mint 22 Wilma base: Ubuntu 24.04 noble

Machine:

Type: Laptop System: LENOVO product: 83DV v: LOQ 15IRX9 serial:

Chassis: type: 10 v: LOQ 15IRX9 serial: <superuser required>

Mobo: LENOVO model: LNVNB161216 v: 31900002 WIN serial: <superuser required>

part-nu: LENOVO_MT_83DV_BU_idea_FM_LOQ 15IRX9 uuid: <superuser required> UEFI: LENOVO v: NECN39WW

date: 09/06/2024

Battery:

ID-1: BAT1 charge: 49.6 Wh (80.9%) condition: 61.3/60.0 Wh (102.2%) volts: 16.1 min: 15.4

model: SMP L23M4PK4 type: Li-poly serial: <filter> status: charging cycles: 56

CPU:

Info: 14-core (6-mt/8-st) model: 13th Gen Intel Core i7-13650HX bits: 64 type: MST AMCP

smt: enabled arch: Raptor Lake rev: 1 cache: L1: 1.2 MiB L2: 11.5 MiB L3: 24 MiB

Speed (MHz): avg: 1001 high: 1370 min/max: 800/4700:4900:3600 cores: 1: 800 2: 800 3: 1099

4: 800 5: 1104 6: 800 7: 1294 8: 1299 9: 1173 10: 1293 11: 1163 12: 800 13: 1191 14: 800 15: 812

16: 800 17: 1370 18: 1037 19: 800 20: 800 bogomips: 112127

Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx

Graphics:

Device-1: Intel Raptor Lake-S UHD Graphics vendor: Lenovo driver: i915 v: kernel arch: Gen-13

ports: active: eDP-1 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2, HDMI-A-3, HDMI-A-4 bus-ID: 00:02.0

chip-ID: 8086:a78b class-ID: 0300

Device-2: NVIDIA GN20-P0-R-K2 [GeForce RTX 3050 6GB Laptop GPU] vendor: Lenovo driver: nvidia

v: 550.163.01 arch: Ampere pcie: speed: 5 GT/s lanes: 8 ports: active: none

empty: DP-3,HDMI-A-5,eDP-2 bus-ID: 01:00.0 chip-ID: 10de:25ec class-ID: 0300

Device-3: Chicony Integrated Camera driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s

lanes: 1 bus-ID: 1-6:3 chip-ID: 04f2:b7ec class-ID: fe01 serial: <filter>

Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 driver: X:

loaded: modesetting,nvidia unloaded: fbdev,nouveau,vesa dri: iris gpu: i915 display-ID: :0

screens: 1

Screen-1: 0 s-res: 1920x1080 s-dpi: 102 s-size: 480x270mm (18.90x10.63") s-diag: 551mm (21.68")

Monitor-1: eDP-1 mapped: eDP-1-1 model: AU Optronics 0x7ead serial: <filter> res: 1920x1080

dpi: 142 size: 344x193mm (13.54x7.6") diag: 394mm (15.5") modes: 1920x1080

API: EGL v: 1.5 hw: drv: intel iris drv: nvidia platforms: device: 0 drv: nvidia device: 1

drv: iris device: 3 drv: swrast gbm: drv: iris surfaceless: drv: nvidia x11: drv: nvidia

inactive: wayland,device-2

API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 550.163.01 glx-v: 1.4

direct-render: yes renderer: NVIDIA GeForce RTX 3050 6GB Laptop GPU/PCIe/SSE2

Audio:

Device-1: Intel Raptor Lake High Definition Audio vendor: Lenovo driver: snd_hda_intel v: kernel

bus-ID: 00:1f.3 chip-ID: 8086:7a50 class-ID: 0401

Device-2: NVIDIA vendor: Lenovo driver: snd_hda_intel v: kernel pcie: speed: 16 GT/s lanes: 8

bus-ID: 01:00.1 chip-ID: 10de:2291 class-ID: 0403

API: ALSA v: k6.8.0-71-generic status: kernel-api

Server-1: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse status: active

2: wireplumber status: active

Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse)

Network:

Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet

vendor: Lenovo RTL8111/8168/8411 driver: r8169 v: kernel pcie: speed: 2.5 GT/s lanes: 1

port: 4000 bus-ID: 07:00.0 chip-ID: 10ec:8168 class-ID: 0200

IF: enp7s0 state: up speed: 1000 Mbps duplex: full mac: <filter>

Device-2: Realtek RTL8852BE PCIe 802.11ax Wireless Network vendor: Lenovo driver: rtw89_8852be

v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 08:00.0 chip-ID: 10ec:b852

class-ID: 0280

IF: wlp8s0 state: up mac: <filter>

Bluetooth:

Device-1: Realtek Bluetooth Radio driver: btusb v: 0.8 type: USB rev: 1.0 speed: 12 Mb/s lanes: 1

bus-ID: 1-14:5 chip-ID: 0bda:4853 class-ID: e001 serial: <filter>

Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.2 lmp-v: 11

sub-v: 91cb hci-v: 11 rev: dfb7 class-ID: 7c010c

Drives:

Local Storage: total: 534.22 GiB used: 315.85 GiB (59.1%)

ID-1: /dev/nvme0n1 vendor: SK Hynix model: HFS512GEJ4X112N size: 476.94 GiB speed: 63.2 Gb/s

lanes: 4 tech: SSD serial: <filter> fw-rev: 51040C31 temp: 37.9 C scheme: GPT

ID-2: /dev/sda vendor: SanDisk model: Ultra Fit size: 57.28 GiB type: USB rev: 3.0 spd: 5 Gb/s

lanes: 1 tech: N/A serial: <filter> fw-rev: 1.00 scheme: MBR

Partition:

ID-1: / size: 467.89 GiB used: 288.95 GiB (61.8%) fs: ext4 dev: /dev/nvme0n1p2

ID-2: /boot/efi size: 511 MiB used: 14.1 MiB (2.8%) fs: vfat dev: /dev/nvme0n1p1

Swap:

ID-1: swap-1 type: file size: 2 GiB used: 1.06 GiB (53.1%) priority: -2 file: /swapfile

USB:

Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 16 rev: 2.0 speed: 480 Mb/s lanes: 1

chip-ID: 1d6b:0002 class-ID: 0900

Device-1: 1-4:2 info: Razer USA RC30-0305 Gaming Mouse Dongle [Viper Ultimate (Wireless)]

type: mouse,keyboard driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s lanes: 1

power: 500mA chip-ID: 1532:007b class-ID: 0300

Device-2: 1-6:3 info: Chicony Integrated Camera type: video driver: uvcvideo interfaces: 3

rev: 2.0 speed: 480 Mb/s lanes: 1 power: 500mA chip-ID: 04f2:b7ec class-ID: fe01 serial: <filter>

Device-3: 1-8:4 info: Integrated Express ITE Device(8176) type: keyboard

driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA

chip-ID: 048d:c996 class-ID: 0301

Device-4: 1-14:5 info: Realtek Bluetooth Radio type: bluetooth driver: btusb interfaces: 2

rev: 1.0 speed: 12 Mb/s lanes: 1 power: 500mA chip-ID: 0bda:4853 class-ID: e001 serial: <filter>

Hub-2: 2-0:1 info: super-speed hub ports: 9 rev: 3.1 speed: 20 Gb/s lanes: 2 chip-ID: 1d6b:0003

class-ID: 0900

Info:

Memory: total: 12 GiB note: est. available: 13.36 GiB used: 3.69 GiB (27.6%)

Processes: 437 Power: uptime: 4h 20m states: freeze,mem,disk suspend: deep wakeups: 0

hibernate: platform Init: systemd v: 255 target: graphical (5) default: graphical

Compilers: gcc: 13.3.0 Client: Cinnamon v: 6.2.9 inxi: 3.3.34

If anyone could suggest potential fixes, that would be very much appreciated.

submitted by /u/CrazyMinh
[link] [comments]

Has anyone been able to get RX 9060/9070 GPUs working on Debian Bookworm? I tried using backports for Mesa 25 & a 6.16 kernel but outside of the card vendor being "ATI" nothing was detected and I wasn't getting acceleration or full resolution. Also tried with AMDGPU-PRO but that didn't work either. I was getting a signal from the GPU's displayport but, again, not fully detected.

submitted by /u/crtcalculator
[link] [comments]

I want to install Linux Mint or Bazzite in the future, most games run fine on them except this game. I've checked the game on ProtonDB and it seems that it doesn't run too well on Linux, is there a way to run it directly on Steam without running a virtual machine with Windows?

Rig: i7 8700, GTX1060 6GB, 16GB of RAM

submitted by /u/MiniatureLegionary
[link] [comments]

It seems like support to force MSAA in dxvk has been removed, i couldn't find an explanation. Is it really gone?

submitted by /u/CurrentAd2405
[link] [comments]