submitted by /u/beer120
[link] [comments]

submitted by /u/Rubber_Tech_2
[link] [comments]

I'm checking out most of my fav games on steam that I play but they only support windows (I wanna switch to Linux) the games are tf2 red dead redemption metal gear solid stuff like that

submitted by /u/J0SEPH4200
[link] [comments]

Hi everyone! I am currently looking for a gaming distro that supports AMD integrated graphics for my laptop. My laptop currently has a Ryzen 5 5600h and a Radeon RX 5500m. The laptop is slow now, back then when I first i got this laptop for Christmas. It was working fine with Windows, however over the years it began to got slower and I knew it may be time to switch to a different operating system. Please let me know by replying!

submitted by /u/Storm_Chasing
[link] [comments]

submitted by /u/vudueprajacu
[link] [comments]

Hello all, in CachyOS, i have checked the kwin debug console, and, as you can see, Steam semms to run in x11 mode. So, for gaming, isn't better to use directly X11 instead of Wayland? Thanks

submitted by /u/Pippo_Peppe
[link] [comments]

It was arguably the worst experience of my life. The game was great! But the shit I had to go through to even install and use windows was wild. I am happily going back to arch now. The game is not worth using windows for.

submitted by /u/tommy132000
[link] [comments]

Crossposted to r/ubuntu

Updated my GPU from a 4060 Ti to a 5070. Now when I log in the screen goes black and the cursor turns to an "x". Tried both HDMI and DP with no avail. Fairly certain I have the GPU hooked into the PSU (850x) properly. I don't have a dedicated 12v 2x6 slot on my PSU so I have two PCIE slots going into the provided adapter. I tried plugging back into the mobo and purging the drivers, reinstalling the recommended drivers, and rebooting to no avail. I am assuming this is a driver-related issue and am trying to figure out how to circumvent. Please advise. Thank you in advance.

submitted by /u/narqd
[link] [comments]

Using mint 22.1. specs: I9 11900kf, RTX 4060. driver: nvidia-driver-575-open

when i load into cs after the season 3 update i start in 60hz, when i change it to 165hz my monitor goes black and doesn't detect an input source as long as cs2 is running. Also had some issues with graphical glitches like some skins not appearing and on nuke any metallic surface is just black.

already: verified the integrity of the game files, reinstalled drivers, tried other driver versions and tried using different types of compatibility modes on steam (some of which won't even let me load into the game)

anyone else been having this issue and/or knows a fix?

submitted by /u/President_Yogurt
[link] [comments]

Hey everyone I want to build a small form factor pc that I can bring around for family trips to do some local coop on. After setting bazzite on my ally x and loving the emulation experience on that, I'd like to build something a bit beefier. As I understand GPU isn't relevant for emulation?

submitted by /u/420Microbiologist
[link] [comments]

submitted by /u/gilvbp
[link] [comments]

I tried to go full linux a couple years ago, ofc as always I like hardcore mode so I got arch, I didnt know half of what I was doing and followed a youtube bald dude's tutorial, after a year of being able to play half my games and having constant problems with everything I gave up and went back to windows.

Now I had problems with w11, it is utter shit, my gpu (rx6700xt) had some driver problems that caused my pc to shut down randomly when playing games with old directx. After trying many solutions and changing my motherboard, power source and cpu cooler (initially thought problem was due to overheating so I got a liquid refrigeration for my CPU (Ryzen 9 5900x). I ended up finding out that amd drivers are better in linux so I happily tried to get back and my god I am surprised, I installed cachyos, it was so easy, I just needed to remember the update and install commands for pacman and have not looked a single time for any archwiki article or anything, everyhting just works, out of the fucking box. I just installed steam and fuck has proton improved, all my games are gold or platinum compatibility, Im now playing mafia old coutry which lauched a couple days ago and it just works the same day it got out, this was unthinkable back then...

Oh and I have tried cyberpunk elden ring and many others that i played on windows and I get between 10-30 more fps on average depending on the game, fuck I'm so happy

Thanks to all the programmers who made this possible, you are the best boys.

I hate microsoft

submitted by /u/RandomPlayerCSGO
[link] [comments]

Limbus Company showing UI flickering, and the now nicknamed \"Slenderman Quixote\"

After installing Limbus Company, ProtonGE9-27 and switching to Xorg, Limbus has been flickering at all times, we've tried fixes, but nothing seems to work, he's using an Intel I3 with a integrated graphics card. Seems weird because I'm also using Ubuntu and he didn't have this issue on Windows.

submitted by /u/rtrb332
[link] [comments]

How do you do fellow Linux gamers?

Recently I have had problems running SCP: Containment Breach.

There were two problems. It would not launch without throwing a 'Memory Access Violation Error'. I tried every launch command that I could try. The second is that once I got it working, I could not set an FPS limit no matter what I did, the in-game limiter is wonky at best, and the the solutions to it, while easy, took a bit of time to find. So I thought I would share the knowledge and make an easy guide to 1, get the game working and 2, get the game's FPS properly capped. These steps are also possible to do on Windows. I recommend both fixes for both Linux and Windows.

Step 1: Fixing The Error

The first fix is really easy. First, find your options.ini file. In SCP: Containment Breach, it is inside the main game files, with the executable. In other editions, such as the Ultimate Edition and Multiplayer Reborn, it is stored inside the game's prefix.

For SCP: Ultimate Edition for example, it is here

<path-to-prefix>/drive_c/users/steamuser/AppData/Roaming/scpcb-ue/Data/options.ini

For Multiplayer Reborn:

<path-to-prefix>/drive_c/users/steamuser/AppData/Roaming/scpcb-mr/Data/options.ini

If you don't know where to find your prefix location, for Steam it is pretty easy to find. Install and run 'protontricks', then select the game, select default prefix, then 'Browse Files...' not to be confused with the 'run explorer' option. You can also find it by finding the store ID of your game via the URL (if it is on the store) and comparing it with the IDs located in

.local/share/Steam/steamapps/compatdata/

Open the options.ini file, and under Advanced, set Play Startup Videos= to 0. So it looks like this:

[Advanced] Play Startup Videos=0

Yes seriously, this is the fix.

dxwrapper

The second thing we need is dxwrapper.

SCP: CB runs using DirectX7 (specifically DirectDraw/Direct3D via ddraw.dll). For Linux this means we are stuck with WineD3D. If you care about stability, compatibility, and capping your fps, dxwrapper is what you need, most importantly because it will give us the ability to translate to Direct3D 9 via the Dd7to9 module, and hence give us the option to run DXVK, which is better, more supported and can properly cap your fps using DXVK_FRAME_RATE= among other options.

None of what I tried worked, short of intentionally starving the game of CPU, but as it turns out it is an imprecise, unsatisfying solution. Maybe it works for some, but it didn't for me. dxwrapper also serves to make the game more stable and compatible, so I highly recommend it.

Step 2: dxwrapper Installation

Download dxwrapper from here, on the bottom right under releases: https://github.com/elishacloud/dxwrapper

Then open the .zip file.

https://preview.redd.it/2bsw6urey8if1.png?width=1281&format=png&auto=webp&s=b3e158228604f9b691150240a4949bd5b2a49a10

From here, go into 'Stub', pick only ONE file called 'ddraw.dll', and place it in your game folder. Then, grab 'dxwrapper.dll' and 'dxwrapper.ini' from the main directory, put that into your game folder as well.

Then open 'dxwrapper.ini' in a text editor, such as Kate or nano, and under compatibility, set 'Dd7to9' to '1', so it looks like this:

[Compatibility] Dd7to9 = 1 D3d8to9 = 0 DDrawCompat = 0 Dinputto8 = 0 DisableGameUX = 0 EnableDdrawWrapper = 0 EnableD3d9Wrapper = 0 EnableDinput8Wrapper = 0 EnableDsoundWrapper = 0 EnableOpenDialogHook = 0 WinVersionLie = off WinVersionLieSP = 0 HandleExceptions = 0 SingleProcAffinity = 0

Save and exit.

Now we're going to add the ddraw file in winecfg, so it prefers the native version first and hence uses dxwrapper. You can also do this with a DLLOVERRIDE launch argument, but in this tutorial we're going to do it with the GUI.

Step 3: Adding ddraw.dll as a DLL override

First we need to go back into protontricks. Open protontricks, select the game's prefix again and this time open 'winecfg'. You will see a window open like this.

https://preview.redd.it/neujjiasz8if1.png?width=410&format=png&auto=webp&s=dc440b4a671d4d409685e4ec2485d15371d34cf3

Click on 'Libraries', then type ddraw.dll and click on Add. It will throw you a warning that changing the load order is not recommended. Click confirm, then apply. You will be able to see ddraw as a DLL override in the list.

https://preview.redd.it/w738wfoq09if1.png?width=359&format=png&auto=webp&s=32941458ec18ab0524616abbf24a8517617e0a3c

Final notes

You have successfully fixed the MAV error and are now using dxwrapper. Wiith that, you are almost set to launch the game. Finally, go into properties of the game and in the launch options, set variables you want, such as for frame capping: DXVK_FRAME_RATE=165 You are all set from there. Make sure to put %command% after your commands. For Windows, obviously these are not necessary.

These are my launch options for SCP: UE:

gamemoderun DXVK_FRAME_RATE=163 DXVK_ASYNC=1 %command%

Cheers! I hope this tutorial will help some people.

submitted by /u/alicefaye2
[link] [comments]

I am having issues getting a Sunshine/Moonlight configuration working properly. It is incredibly slow. I have a 2.5GB connection between the client host. I have tried pretty much everything I could find online to get this working properly. Anyone here know what to do?

PS. This setup was working just fine on Windows. I just recently switched to CachyOS and gaming has been great locally. I need Sunshine to work properly since I stream from my TV quite often. Really dont want to go back to windows.

System:

OS: CachyOS x86_64

Kernel: Linux 6.16.0-5-cachyos

DE: KDE Plasma 6.4.3

WM: KWin (Wayland)

CPU: 13th Gen Intel(R) Core(TM) i5-13600K (20) @ 5.10 GHz

GPU: NVIDIA GeForce RTX 5070 Ti [Discrete]

Memory: 8.51 GiB / 31.05 GiB (27%)

Swap: 0 B / 31.05 GiB (0%)

https://preview.redd.it/ewtcteeo69if1.png?width=1681&format=png&auto=webp&s=b1c566642c5cc256a75e45ebad09a3cb665e66a1

https://preview.redd.it/1h6yi60x69if1.png?width=1753&format=png&auto=webp&s=0575defaf862f31d57c06516534a731a6aa18ced

For the NVENC preset I tried P1 and P4. Both run terribly.

Sunshine SystemD Settings:
[Unit]
Description=Sunshine self-hosted game stream host for Moonlight
After=graphical-session.target

[Service]
ExecStart=/usr/bin/sunshine
Restart=on-failure
RestartSec=5s
Environment="WAYLAND_DISPLAY=wayland-0"
Environment="XDG_SESSION_TYPE=wayland"

[Install]
WantedBy=default.target

submitted by /u/wingsofgundam
[link] [comments]

Hi

So I have tried to play with HDR and I cannot figure it out

Every time I put HDR ON the colors becomes "washed" out or or maybe just more bright.

Now I believe that there would be more color space with HDR but as it is now, it looks better without it

I am sure I am doing something wrong, because when I game on Windows (dualboot) it all looks better.... though it is not the same game I am running (BF1)

I have waited for some time to playing certain games, as I wanted to play them with HDR and without gamescope.

So I waited for all the tech to get aligned, like Proton, Wayland, Mesa, Radeon.

But now it seems there is something wrong.

Can anybody tell me, it is just the games Resident Evil 4 Remake and Diablo 4, That have bad HDR implementation or it is Proton or Linux, that is till not ready for it ?

or is it my settings or something in game or in system ?

so here my system specs:

------------------------------------

Fedora Linux (fully updated and newest version)

KDE

Wayland

Steam (flatpak)

Proton-GE 10-10

9800X3D

9070XT

HDR1000 screen connected through DisplayPort 2,1, that works fine with HDR in windows

I run this command in Steam Launch options:

PROTON_ENABLE_WAYLAND=1 PROTON_ENABLE_HDR=1 %command%

Display configuration I set for "prefer efficiency " and after that "prefer color accuracy" tried both and nothing really changed

-------------------------------------------------------------------

Also another thing, when I set HDR on in Resident Evil4 remake, the mouse seems to have some latency all of a sudden... anybody knows what that's about ?

PS all the bright and washed out pictures is when HDR is on,

It is especially noticeable when you look at the Diablo 4 menu

submitted by /u/BidRevolutionary2339
[link] [comments]

I use my computer with a TV and I tried the whole adapter thing with a 7000 series a while back and it did not go well. There would be flickering and other issues. Even when I thought it was finally working right I started seeing color banding on random scenes telling me it was still not quite right.

Is there any solution yet in 2025? It's one of the main reasons I still need Nvidia. I keep eyeballing the 9070 but I just know I'll be disappointed again when I plug it in and see color banding and flickering and everything else and I'm not about to lock myself to 60hz in 2025.

submitted by /u/DistantRavioli
[link] [comments]

Hello! I finally made the switch from Windows to Linux! I've been using Linux for years, but as a secondary system. I have EndeavourOS, which I've been using as my main system for 3 months. All the games I've played, no problems (I don't use the anticheat ones), games like Gow Ragnarok, RE4 Remake, GTA V, Spiderman, etc. I didn't even install games from any store ;) I even installed them using Steam. It's spectacular, really. I have a dual boot with Windows, just in case. I really like how everything works!

submitted by /u/Vintage-KL2
[link] [comments]

Hey everyone, I've been having some problem with The Sims 2 Legacy Collection.

I installed the EA App through Lutris using Wine 10.9, and then I installed The Sims 2 Legacy Collection and The Sims 3.

When I launched The Sims 2, I noticed the graphics were terrible and the only resolution option on the settings was 320x240. So I looked onto the Video Cards.sgr file since even though the game is updated, I wasn't sure it was recognizing my GPU. Indeed, my GPU wasn't listed, so I added it using the information I already had from The Sims 3 file. But it didn't work.

So I took a look at the config-log file under Documents/The Sims 2 Legacy/Logs and this is what the game gathered:

=== Application info === Name: The Sims 2 Legacy Version: 1.18.0.189 Build: ReleaseSRT === Machine info === OS version: Windows NT 0.0 CPU: 5180Mhz, Name:AuthenticAMD, FPU:1, MMX:1 Memory: 0MB Free memory: 0MB User: moira Computer: THEARCHER === Sound device info === Name: Unknown Driver: Unknown === Graphics device info === Number: 0 Name (driver): GeForce 7800 GTX Name (database): GeForce 7800 GTX <<NOT FOUND IN DATABASE!>> Vendor: Chipset: Vendor: 10de, Device: 0091, Board: 00000000, Chipset: 0000 Driver: nvd3dum.dll, Version: 32767.65535.65535.65535, GUID: 11754BCB-C5A3-E7CE-7B5A-BFAD3B5B8CF7 Driver version: 65535 Monitor: \\.\DISPLAY1 Monitor aspect: 1.776223, 16:9 Screen mode: 1920x1080x32BPP,144Hz HW T&L: Fixed function:1 Programmable:3.0 Pixel program: 3.0 Texture stages: 8 AppControlledAA: 1

The thing is: this is NOT my GPU. I have a NVIDIA GeForce RTX 3060.

For comparison, this is The Sims 3 DeviceConfig.log, running on the exact same prefix:

=== Application info === Name: Sims3 Version: Build: Release === Rating info === GPU: 5 GPU Memory: 2 CPU: 4 RAM: 4 CPU Speed: 3700 Threading: 3 Adjusted CPU: 4534 RAM: 32037 Adjusted RAM: 31525 Cores: 8 === Machine info === OS version: Windows 8 6.2.9200 OS prod type: 0 OS major ver: 6 OS minor ver: 2 OS SP major ver: 0 OS SP minor ver: 0 OS is 64Bit: 1 CPU: AuthenticAMD Brand: AMD Ryzen 5 3400G with Radeon Vega Graphics Family: 15 Model: 8 Cores: 8 HT: 0 x64: 0 Memory: 32037MB Free memory: 22725MB User: moira Computer: THEARCHER === Graphics device info === Number: 0 Name (driver): NVIDIA GeForce RTX 3060 Name (database): GeForce RTX 3060 [Found: 1, Matched: 1] Vendor: NVIDIA Chipset: Vendor: 10de, Device: 2504, Board: 00000000, Chipset: 0000 Driver: nvd3dum.dll, Version: 32767.65535.65535.65535, GUID: 11754BCB-C5A3-E7CE-7B5A-BFAD3B5B8CF7 Driver version: 65535 Monitor: \\.\DISPLAY1 Texture memory: 192MB Vertex program: 3.0 Pixel program: 3.0 Hardware TnL: 1

Does anyone know why that is, and how I can fix that? Thanks in advance!

submitted by /u/abyissal
[link] [comments]

submitted by /u/beidoubagel
[link] [comments]