Counter-Strike 2 has begun a new season, and Valve added a new feature called Trade Protected Items and they're poking fun at Half-Life fans too.

.

Read the full article on GamingOnLinux.

Valve have added a new rule to the Onboarding guide for game developers, noting that payment processors get a say in what stays on Steam.

.

Read the full article on GamingOnLinux.

I have visual artifacts in all games. Same games run perfect on m3 pro. I suspect this is drivers issue, not directly related to psxc2.

submitted by /u/AncientBattleCat
[link] [comments]

Noob user here I tried Monster Hunter Wilds on Bazzite, but the game ran extremely poorly, stuttering a lot, usually hitting 28/30 fps without FG and staying between 40/50 with FG. What caught my attention was the GPU usage, rarely exceeding 50%, regardless of the graphics settings and fsr at 1080p.

I also tested it on a fresh Cachyos installation, and the result was the same.

Afterwards, I reinstalled Windows 11 and tested it on that. The result was the opposite, with me managing to reach 60 fps on the low graphics settings and achieving an average of 110 with the game on medium/FSR quality and fg on, with GPU usage always at maximum.

I tested the game on the latest stable version of Proton, on Proton-GE 10.7 and 10.8, on Experimental, and on Cachy Proton.

I also tried some commands I saw people using on ProtonDB, but none of them worked.

My PC specs: Ryzen 5 5500 Rx 5700 XT 8 GB 16 GB DDR4 3000 MHz

Can anyone shed some light on this? I know the game is poorly optimized, but the performance discrepancy is huge between linux and windows.

submitted by /u/Mordaredrom
[link] [comments]

https://preview.redd.it/ws2rc1pr97df1.png?width=1920&format=png&auto=webp&s=066bbc70c4baeab7ee8d458ce088ed660237ab65

https://preview.redd.it/yfuj3rps97df1.png?width=1920&format=png&auto=webp&s=a800e900605f65a9c851e4ff6dd0783f9d1f535b

so the software climes my mouse works and even kde said the mouse name well but somehow it doesn't

but thankfully the ps4 controller (dual-shock) works great

but is there an alternative? yeah piper works great but of pipr is limited when it's about rgb

system info:

device:Dell G15 5511

distro based:arch

packages i tried: native pacman , flatpak and appimge

submitted by /u/Better-Quote1060
[link] [comments]

I recently upgraded to an RX 7600 (specifically Sapphire RX 7600 Pulse Gaming OC). It's currently paired with a R5 2600, obviously not a very strong CPU but I'm not sure if that's the issue. I played High On Life and it ran perfectly fine with few minor stutters, which is fine for me.
Here's a picture of MangoHud while playing No Man's Sky on High preset. https://i.imgur.com/SXnSPSi.png For comparison, I just watched a benchmark of the same GPU, same game and same settings with the guy averaging 120 FPS.
Mangohud is constantly showing thermal throttling and sometimes power throttling as well, which I read is possibly a bug and the card is not actually throttling. So why am I only getting 60 FPS when neither the card nor any single CPU core is fully utilized?
I'm using corectrl to undervolt and OC the card. I tried not changing anything, I tried only increasing power limit and setting power profile, same results. I'm also setting the CPU's governor to performance and also currently using zen kernel. The card doesn't reach it's max frequency (2755MHz supposedly) in this game and it's like it's actually thermal throttling. Same thing happened in BeamNG btw. I did not test other games yet because the card is literally brand new.
EDIT: Just found a similar post and the guy enabled Above 4G decoding and Resizable Bar and it solved it for him. Not for me unfortunately. Tried without rebar, also tried disabling Fsync and Esync. Btw I'm averaging 120FPS in High On Life and the card is being utilized properly.

submitted by /u/Miniller
[link] [comments]

Hi, just taking my first steps into doing VR on Linux. I just REALLY, really dislike Windows. I'm a fairly experienced Linux administrator, retired now for about 5 years.

My first goal is to get VRChat running on Linux.

So, I have a PC with an Intel i9, an Nvidia 4090, zads of RAM and SSD space. I am running Windows 11. I have a Bigscreen Beyond headset, and the Valve base stations and hand controllers, and I have been running DCS, MSFS 2024, and VRChat on this setup without problems (or actually, without more problems than most people seem to have!).

On the Linux side, I have Fedora 42 dual booting on that PC. I have SteamVR and VRChat installed on it (through Steam, natch). It is my understanding from reading Steam's documentation on SteamVR for Linux that the Beyond will simply not work with the Linux proprietary Nvidia drivers at this time. That's OK, because I also have an Apple Vision Pro headset, and I have had some luck in the past connecting the PC to the AVP using ALVR, at least when using Windows.

I have installed ALVR on my Linux partition. When I run it on both the PC and the headset, I am getting connected, and I'm not seeing any obvious errors being logged. Unfortunately, I'm only getting "wireframe" in the headset, it's not actually showing me any images yet. Still, progress!

Do I have a chance to get this working? It would be nice if audio worked through the headset, but I can certainly work around that if it doesn't.

submitted by /u/Senior-Poetry9521
[link] [comments]

Hi so I’m new to the concept of Linux but I’m eager to give it a shot. I’ve looked into a few distros such as Mint, Cachy, and Bazzite. I was curious which one would be the best for someone who’s used Windows and Mac for years and looking for an easier setup, while getting the best gaming experience?

submitted by /u/umisidd
[link] [comments]

Hello everyone. I am currently using a Corsair Scimitar RGB Elite which I love the feel of, but sadly has a massive issue when I use it on Arch involving the pointer movement. It also does not have support from ckb-next.

Are there any comparable mice that have Linux support? I'd prefer vendor supported open source drivers but if the usermade drivers work great, that's okay too.

The issue I'm having is documented here

submitted by /u/No_Insurance_6436
[link] [comments]

greetings, i write this question as casual linux user who switched from windows 10 since two years ago, during my distro hopping period, i tried out almost everything steamos based distro out there and all of them had one thing in common: they push new updates to the system on daily basis, and sometimes they even require to reinstall the whole system in case of kernel updates like nobara, but i didn't encounter such thing on official steamos, valve occasionally push system update and can be updated while on game mode, not to mention the decks plugins which allows for updating flatpaks within game mode. so far I've been using it for about two months, and given how smooth and seamless the user experience has been for me, i feel like it should be brought up as a viable gaming distro in my opinion.

submitted by /u/Uaagh
[link] [comments]

Hi, my university wifi blocks access to twitch, reddit, chatgpt and many more sites. But on firefox I route my requests through a socks5 proxy to an ec2 instance. Since firefox has a built in client for socks5, it works.

But when I try to run steam through proxychains, it does not work. Is there anyone who managed to get this worked out on their system?

I am aware that UDP is used for multiplayer games. But I just want to download offline single player (or local multiplayer) games on steam.

submitted by /u/dungeon13
[link] [comments]

[ Removed by Reddit on account of violating the content policy. ]

submitted by /u/Chairbottletooth
[link] [comments]

I tried to download bakkesmod for rocket league on steam and whenever I open rocket league I get a green screen and don’t know what to do, thank you.

submitted by /u/No_Independent1443
[link] [comments]

Like the title says, I've tried countless times trying to run Resident evil 1 with CRB via the lutris prefix and through steam and it doesn't want to work. It goes extremely smoothly up until i press ok on the config menu where a small black window pops and it immediately closes. Mind you I'm doing this with the Mediakite version of the game and not the GOG release which, if all else fails, i will buy and finally get this working but, until then I really wanna figure out what I'm missing here if anyone could help

As a sidenote, I have RE2 and 3 running perfectly through steam and have had no issues at all but granted those versions were made by Sourcenext and not Mediakite which most likely plays a run in this issue.

submitted by /u/TrillNoah
[link] [comments]

I'm running Linux Mint 22.1 xfce. I downloaded retroarch and for some reason it looks like this. Does anyone know what I did wrong and how I can fix it?

submitted by /u/dposse
[link] [comments]

submitted by /u/KFded
[link] [comments]

Hi, recently got back into Cyberpunk time to finally finish it properly, runs great on Linux have to say even better than it did on win11/10 from what I remember. No stuttering and very consistent smooth frame rate, I'm running Bazzite on ROG laptop with RTX 2070 8gigs, 32gigs RAM, i7 10th gen. External monitor is a pretty nice one with high refresh rate but only 1080p which is fine for me. Got the settings set to Ultra, native resolution, DLSS on Quality. No frame generation, and no ray tracing. Game looks great and running smooth but occasionally just decides to fully lock up. It does a full freeze, then 1 frame skip, sound still going. Then just have to minimize the game and force shut it down. When this happens and how often seems unpredictable, can happen after 20min of playing or it might run great for 3hrs. I've tried different proton versions doesn't seem to make a difference. Any idea why its doing it? any tweaks to fix it?

submitted by /u/Krazykov
[link] [comments]

I really want to use Linux for gaming, and ditch Windows forever, but it seems like Linux just doesn't want to let me. Now I'm trying the latest SteamOS installer. It seems to work just fine. Except it doesn't.

First, a big annoyance is the fact that there doesn't seem to be a way to change the default audio device. I have my gaming rig hooked to my LG C1 OLED TV, so of course I want the audio to be sent to it via HDMI, to then be sent to the home theater via eARC. But SteamOS ALWAYS selects the on-board sound on booth, and there is no way to change the default device to the graphics card, so I have to go and manually change it every time. Of course, this problem doesn't exist at all on Windows.

But that at least has a workaround. The true problem is with what doesn't work no matter what: display settings.

When in Gaming Mode, HDR can be enabled, but the frame rate is locked to a maximum of 60fps. This is unacceptable. My TV supports 120hz, and I play all of my PC games at 120fps (unless they are locked internally). On the other hand, in desktop mode, it is possible to set the display refresh rate to 120Hz no problem, and games run at 120fps. But HDR is unsupported!

Why does it always have to be like this? Why can't these simple things just work, the way they just work on Windows?

Maybe there is some crazy ritual to fix this, but I haven't found anything anywhere. If you know how to enable HDR and HFR at the same time on SteamOS, please let me know.

submitted by /u/Fighterguardc
[link] [comments]

I recently got into playing around with Linux. I have been using bazzite. I initially installed it on a system that uses a ryzen 3 pro 2200g. I know this is not a fantastic processor and to boot I was using the integrated Vega 8 graphics. However, when I would launch a game, the "processing vulkan shaders" box would pop up and take a few minutes, then the game would run fine. Fast forward, I decided to drop an rtx 2070 super into the system to see how adding a graphics card would work. Mind you I completely wiped the initial install of bazzite and reinstalled bazzite using a new bootable flash drive with the selected Nvidia options from the bazzite website. Everything seemed like it was running OK until I decided to try to run games. Now the "processing vulkan shaders" takes an absurd amount of time. Likely would take hours if I let it finish. This clearly can't be normal. I was wondering if anyone had any idea of why this was happening or how to solve this issue? Any help is appreciated

submitted by /u/TheHeftyG
[link] [comments]

submitted by /u/beer120
[link] [comments]