submitted by /u/OldManBrodie
[link] [comments]

Operating System: Manjaro Linux KDE Plasma Version: 6.3.3 KDE Frameworks Version: 6.12.0 Qt Version: 6.8.2 Kernel Version: 6.12.20-2-MANJARO (64-bit) Graphics Platform: X11 Processors: 16 × Intel® Core™ i9-9900KF CPU @ 3.60GHz Memory: 31.3 GiB of RAM Graphics Processor: NVIDIA GeForce RTX 4060 Manufacturer: Gigabyte Technology Co., Ltd. Product Name: Z390 AORUS ELITE LD_PRELOAD="" gamemoderun mangohud %command%

The game is installed on a separate SSD from Steam, and Steam is not installed as a Flatpak

Just started playing today and noticed that as I play the memory usage slowly creeps up at a somewhat steady rate (0.1 gigs every ~20 seconds); the first time I noticed the issue was when the game started lagging horribly, which prompted me to look at MangoHud and see 27 gigs of usage, so I figured the lag was caused by reading the swap - aside from that the game runs buttery smooth

I've tried Proton 9.0-4, Experimental, Hotfix, and GE9-26 and the issue seems to be present regardless; I did also try two or three other versions of GE that I can't remember, but it's not really important because the game either didn't launch at all or crashed shortly after the splash window appeared anyway

I tried looking for a solution online and found nothing Linux-specific, though I did find that deleting TargetHardwareProfiler.dll might help, but apparently it only solves the game memory leaking on the login screen (which it wasn't doing for me anyway); I did also find (somewhere) that adding PROTON_USE_WINED3 could fix it but the game would not launch

I'm still a bit of a newbie to gaming on Linux so I am completely out of ideas

submitted by /u/StaticVoidMaddy
[link] [comments]

I've encountered a strange issue with a setup I previously used to run warframe flawlessly with proton. After updating to the newest nvidia 570 driver and a newer manjaro kernel my warframe now consistently freezes on the login screen as pictured https://imgur.com/a/ZLf3FNW

Steam logs this but I cannot find any issue

ProtonFixes[55987] INFO: Running protonfixes ProtonFixes[55987] INFO: Running checks ProtonFixes[55987] INFO: All checks successful ProtonFixes[55987] INFO: Using global defaults for "Warframe" (230410) ProtonFixes[55987] INFO: No global protonfix found for "Warframe" (230410) Adding process 56012 for gameID 230410 Adding process 56013 for gameID 230410 esync: up and running. Adding process 56014 for gameID 230410 Adding process 56017 for gameID 230410 Adding process 56019 for gameID 230410 Adding process 56022 for gameID 230410 Adding process 56032 for gameID 230410 Adding process 56048 for gameID 230410 Adding process 56054 for gameID 230410 Adding process 56154 for gameID 230410 Setting breakpad minidump AppID = 230410 Steam_SetMinidumpSteamID: Caching Steam ID: 76561198258638271 [API loaded no] Adding process 56172 for gameID 230410 Adding process 56231 for gameID 230410 Adding process 56256 for gameID 230410 Adding process 56274 for gameID 230410 Adding process 56296 for gameID 230410 Fossilize INFO: Overriding serialization path: "/run/media/james/DATA/SteamLibrary/steamapps/shadercache/230410/fozpipelinesv6/steamapprun_pipeline_cache". Adding process 56384 for gameID 230410 Fossilize INFO: Overriding serialization path: "/run/media/james/DATA/SteamLibrary/steamapps/shadercache/230410/fozpipelinesv6/steamapprun_pipeline_cache". Adding process 56468 for gameID 230410 Adding process 56472 for gameID 230410 Adding process 56668 for gameID 230410 Fossilize INFO: Overriding serialization path: "/run/media/james/DATA/SteamLibrary/steamapps/shadercache/230410/fozpipelinesv6/steamapprun_pipeline_cache".

Has anyone else encountered this or know any solution? I have tried many different proton versions, warframe with dx11(previously only worked with dx12) clearing shader cache, and clean OS reinstall.

I can provide any other needed info upon request.

EDIT: With gamemoderun %command% I get this error

Fossilize WARN: Pipeline library handle 0x00007f464c07c980 is not registered. It has either not been recorded, or it failed to be recorded earlier (which is expected if application uses an extension that is not recognized by Fossilize). submitted by /u/mellow1238
[link] [comments]

Out now and exclusive to the GOG store, Croc Legend of the Gobbos returns with a Remaster from Argonaut Games, bringing the classic back with many modern enhancements.

.

Read the full article on GamingOnLinux.

The Fortress of Dr. Radiaki originally released back in 1994 and it's getting a little revival thanks to ZOOM Platform Media / Lee Jacobson with a Steam release due out in May.

.

Read the full article on GamingOnLinux.

FUMES is simply awesome. Bringing back retro fast-paced car combat that feels like the classic Interstate '76 and Twisted Metal meets Mad Max only more crazy with boss battles and all sorts.

.

Read the full article on GamingOnLinux.

I am trying to make my new RTX 50-series GPU to work under Ubuntu. Currently I am stuck at 1280x800 on my 4k display (Dell U2723QE). And the display is not detected correctly (while being connected using DisplayPort) $ cat /sys/class/drm/card0-Unknown-1/modes 1280x800

What I did so far:

• Upgraded to Plucky (25.04) since it had nvidia-drivers-570 $ lsb_release -rd Description: Ubuntu Plucky Puffin (development branch) Release: 25.04

• Followed the guide here: https://www.reddit.com/r/linux_gaming/comments/1d1mcrm/i_made_a_guide_to_help_you_install_manage_the/ (made by u/Fluffy_Wafer_9212). And installed nvidia-drivers-570 (version 570.133.07, also the same as the latest available from the NVIDIA web site) $ apt policy nvidia-driver-570 nvidia-driver-570: Installed: 570.133.07-0ubuntu2 Candidate: 570.133.07-0ubuntu2 Version table: *** 570.133.07-0ubuntu2 500 500 http://archive.ubuntu.com/ubuntu plucky/restricted amd64 Packages 100 /var/lib/dpkg/status

• Identified that the driver is used for the device: ``` $ lspci -v ... 01:00.0 VGA compatible controller: NVIDIA Corporation GB202 [GeForce RTX 5090] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device 4171 Flags: bus master, fast devsel, latency 0, IRQ 116, IOMMU group 12 Memory at f0000000 (32-bit, non-prefetchable) [size=64M] Memory at 1800000000 (64-bit, prefetchable) [size=32G] Memory at 1410000000 (64-bit, prefetchable) [size=32M] I/O ports at f000 [size=128] Expansion ROM at f4000000 [disabled] [size=512K] Capabilities: [40] Power Management version 3 Capabilities: [48] MSI: Enable- Count=1/16 Maskable+ 64bit+ Capabilities: [60] Express Legacy Endpoint, IntMsgNum 0 Capabilities: [9c] Vendor Specific Information: Len=14 <?> Capabilities: [b0] MSI-X: Enable- Count=9 Masked- Capabilities: [100] Secondary PCI Express Capabilities: [12c] Latency Tolerance Reporting Capabilities: [134] Physical Resizable BAR Capabilities: [140] Virtual Resizable BAR Capabilities: [14c] Data Link Feature <?> Capabilities: [158] Physical Layer 16.0 GT/s <?> Capabilities: [188] Physical Layer 32.0 GT/s <?> Capabilities: [1b8] Advanced Error Reporting Capabilities: [200] Lane Margining at the Receiver Capabilities: [248] Alternative Routing-ID Interpretation (ARI) Capabilities: [250] Single Root I/O Virtualization (SR-IOV) Capabilities: [290] L1 PM Substates Capabilities: [2a4] Vendor Specific Information: ID=0001 Rev=1 Len=014 <?> Capabilities: [2bc] Power Budgeting <?> Capabilities: [2f4] Device Serial Number f1-b1-91-ed-bc-2d-b0-48 Kernel driver in use: nvidia Kernel modules: nvidiafb, nouveau, nvidia_drm, nvidia

```

Any advice?

submitted by /u/kennyminigun
[link] [comments]

Its worked for a while, but i mean like no hickups! Im using a quest 3 with Envision and WiVRn, and it all just worked immediately out of the box.

VrChat stuttering is fixed, no random fps drops, no crashing, space drag is integrated and plugin support too. I am shocked at how much better it is than steamVR with ALVR in my experience, which took hours of troubleshooting and such!

Lmk how your experience has been with it, and if it goes so smooth for everyone :)

submitted by /u/E23-33
[link] [comments]

Valve have truly opened the floodgates for Team Fortress 2 mod teams when they added TF2 to the Source SDK, with Team Fortress 2 Legacy announced for a Steam release.

.

Read the full article on GamingOnLinux.

recently i just installed linux bazzite for the first time but i dint have a great time with it and installed cachy os right after and im having a better experience, but give some advice at wine/proton - emulating games / compatibility and other stuff | how crack games on linux, anything is valid | im a new linux user and im on my firsts steps so need yall help

submitted by /u/Swimming-Bowler-4574
[link] [comments]

The Armor Games Humble Bundle brings 10 interesting looking highly-rated indie games for you, a nice chance to grab something new for the week. Included are compatibility ratings for Steam Deck and Desktop Linux.

.

Read the full article on GamingOnLinux.

Are there any Faceit alternatives where you can play on Linux?

submitted by /u/lanxangwr
[link] [comments]

Gravelord is an Early Access boomer shooter from Fatbot Games, creators of the dungeon crawler series Vaporum, and the latest update makes it more accessible with it now Steam Deck Verified thanks to the addition of controller support.

.

Read the full article on GamingOnLinux.

I use Fedora 41 with gnome and wayland + rtx 2080. when enabeling hw acceleration most of the time the steam side menu glitches out but not always. Without everything works fine but the fps are realy low in steam big picture. Everything else works fine, like gaming and so on

submitted by /u/Fuchteltom
[link] [comments]

Hey !

I have freshly installed CachyOS on my battlestation to start gaming on Linux. I had already installed it on an old laptop to get used to KDE plasma etc... everything good so far !

However, i have some weird slow moments and quick freezes that should happen during basic office task (open settings, open steam, transfer files etc...). I didnt try gaming so far. It's also a bit slow to boot, even if it got better after some reboots.

I have installed on a freshly installed Curcial P310 SSD 2To fully dedicated to Linux. I have installed gaming packages, new drivers etc...

My specs are :

• CPU : AMD Ryzen 5 7600X
• GPU : AMD Radeon RX 9070
• MB : MSI B650 Tomahawk
• RAM : Corsair Vengeance 32Gb DDR5

Also, it seems a bit slow to download and/or install games (Maybe its my impression, its not a wifi issue as i have 200Mb/s download on Win10). Maybe i missed some crucial tweaks or drivers ? Thanks a lot for your help :)

submitted by /u/djoulo103
[link] [comments]

Nice to see Valve getting more pre-release testing done for major games. SILENT HILL f has now been rated Steam Deck Playable.

.

Read the full article on GamingOnLinux.

Jackbox Games just held their first Jackbox Direct event to detail what they're working on with Jackbox Party Pack 11 being announced with all-new games. Additionally, we got a tease of a standalone game Trivia Murder Party 3.

.

Read the full article on GamingOnLinux.

A rather big release for CoolerControl is now available with version 2.1 bringing numerous major feature enhancements to the popular open source app. Control all your cooling devices on Linux across CPUs, GPUs, RGB lighting and more.

.

Read the full article on GamingOnLinux.

Hi everyone!

I’ve seen several people struggling to run Disco Elysium on older Linux hardware — but my case is a bit different. I actually managed to get the game running, though I’m facing a weird issue related to highlighting interactive objects.

In Disco Elysium, when you press TAB or right mouse button, the game normally highlights interactable objects (e.g., outlines them). But on my setup, nothing gets highlighted.

I’ve learned that this effect is likely part of post-processing / outline rendering — which seems to be broken or disabled for me.

I found a file:
Settings.json at:
SteamLibrary/steamapps/compatdata/632470/pfx/drive_c/users/steamuser/AppData/LocalLow/SUN Studio/Disco Elysium/Settings/

There’s a line:
"highlightToggle": false
Changing it to true doesn't help — it resets to false every time the game starts.

Now the game only launches if I run:
MESA_LOADER_DRIVER_OVERRIDE=crocus steam steam://rungameid/632470 (Previously, it worked even with i965, but now that fails) with PROTON_USE_WINED3D=1 %command% in steam, but post-processing didn’t work.

My system info:
OS: Manjaro Linux (64-bit)

Kernel: 6.12.19-1-MANJARO

CPU: Intel Core i3-3110M @ 2.40GHz

GPU: Intel HD 4000 (IVB GT2)

GPU Driver: Mesa 25.0.1-arch1.2

RAM: 8 GB

Proton Version: UMU Proton, tried GE

Any help would be super appreciated — I’ve come this far and would love to fix this last piece. Thank you in advance! :3

submitted by /u/wettterrr
[link] [comments]

No CAP_SYS_NICE, falling back to regular-priority compute and threads.
Performance will be affected.

It appears too frequently, I always need to do:

sudo setcap 'CAP_SYS_NICE=eip' $(which gamescope)

It is really annoying!

submitted by /u/s9209122222
[link] [comments]