Hello,

I like to enable Mangohud in PCSX2 but I don´t know how to do it and Googling hasn´t come up with any results.

The shortcut to run PCSX2 is:

/usr/bin/flatpak run --branch=stable --arch=x86_64 --command=pcsx2-qt net.pcsx2.PCSX2

How must I edit this to have Mangohud enabled?

I'm on Linux Mint by the way.

submitted by /u/suckingvamp
[link] [comments]

For now I use Ubuntu but I want to switch on Fedora. I use my computer mainly for gaming and on Ubuntu I was having big input lag or stuttering if I wasn't having as much fps as Hz on my monitor. I was wondering if I switch on Fedora this would stop. + I don't like snaps

submitted by /u/Yankes2pl
[link] [comments]

Hey guys, so there's a lot of news on how gnome, fedora and Ubuntu are completely dropping X org. I get it Wayland has matured. X org is a dinosaur.

But I've had nothing but issues and naggles on Wayland. I switched fully to Linux a little over a year ago. Some of the issues and snags was fixed simply moving to X11.

With the recent news I've decided to try Wayland again and try and figure some issues out.

In Wayland. Windows and apps can freeze more. Running pretty much anything on steam causes games to show "steam_app_123" may not be responding. With close or wait buttons in a constant loop. (But the games generally are just loading up fine) it's just very annoying.

Some apps steam some reason jumps to the foreground. Sometimes causing issues and crashes.

Heroic behaves exactly the same. Non steam games and wine programs become unstable.

And generally the system is slightly more sluggish.

On X11 other than a longer boot up into the desktop. Everything works as intended, stable and snappy.

Any advice to diagnose and fix Wayland? Now would be the time to learn how display servers work. I was using Nvidia drivers (1050ti) then moved to AMD. (6600 XT) Early on when I made the switch.

submitted by /u/spelmo3
[link] [comments]

Hey everyone,

I’m planning to switch to Linux but still dual boot Windows for some specific games and occasional compatibility. Here’s my situation:

• My PC has older specs but a good GPU (RTX 3060 Ti).
• I mainly use my PC for gaming (Steam and some Windows-only games), recording/streaming with OBS, editing videos for YouTube (DaVinci Resolve), and some photo work (Photoshop).
• I’m already somewhat familiar with Steam Deck and have experience messing around with SteamOS, modding, and trying stuff by trial and error.
• I’d like a distro that works well out of the box with NVIDIA drivers and has good support for OBS and gaming in general.
• I’m not afraid to learn and try things, but I’d prefer something that doesn’t require constant fixing after updates.
• I plan to dual boot. Windows will be installed on one drive, and Linux on another.

A couple of specific questions:

1. Which distro would you recommend for my use case? I’m considering Pop!_OS, Nobara, or Manjaro but open to other suggestions.
2. If my second drive is Windows, and I download files while booted into Linux, can I save them on the Windows drive and access them normally when I boot back into Windows?
3. Any tips for handling DaVinci Resolve and Photoshop on Linux without a ton of headaches?

Thanks in advance for any help. Sorry if these questions are basic—I just want to be sure before I commit to dual booting.

submitted by /u/TrickyHomework5126
[link] [comments]

Hey guys and girl, today I wanted to inform you that after a long, long year, I finally completed and published my SOLO game.

Hope this post finds you well and you will consider taking a look and leave a feedback/review!

Game: https://store.steampowered.com/app/3653460/ (I made sure is running good on linux)

submitted by /u/Spiritual-Biscotti26
[link] [comments]

Many people claim that nvidia is "slower" or "much slower" in linux than in windows. My personal experience is different - I feel there is *no performance difference*.

So I did some tests, and found that at least in some games it's exactly like that: no difference.

GPU: RTX 5070, open linux driver version 570, windows driver 576.

Game: World of Warcraft (retail version 11.x), exact same scene and graphics settings in both cases. Also did tests in cyberpunk 2077 with similar results.

Linux OS: debian 12 stable + xanmod kernel 6.11.14 + wine 10.7 ntsync enabled

Windows OS: win 11 LTSC IoT

https://preview.redd.it/9zqhr7b55lcf1.png?width=250&format=png&auto=webp&s=7921afaee72229f19aeaf99733c74a807fb9d95c

^ debian

https://preview.redd.it/53irpev75lcf1.png?width=250&format=png&auto=webp&s=9d222103147a536496e43472febdf32bf3393736

^ windows.

Am I missing something?

submitted by /u/maokaby
[link] [comments]

For some reason my throttle and rudder pedals stopped being recognized by both versions of MS Flight Sim the joystick is detected fine as well as my xbox controller , I have tired most things to troubleshoot and I am unsure what is going on.

-Changed USB ports
-Confirmed working in other games
-Tried to see if drivers were the issue (they were not)

Both games are running on Proton GE (latest) on Linux Mint (latest) AMD Ryzen 5800X3D and 7700XT (Kisak PPA drivers)

I have read somewhere that disabling the steam controller in Steam settings can fix the issue but this has not changed anything either.

If anyone managed to get all their controllers working please let me know how.

submitted by /u/Xav_NZ
[link] [comments]

https://preview.redd.it/q5tnq43yxkcf1.png?width=1920&format=png&auto=webp&s=aa21511264f2bb4382e4733c91b7aded5b311740

I don't know why when I switch my games to windowed mode the decorations look like a Windows' Safe Mode...

How can I fix it? The same thing happens in all games and different proton versions

My setup:

- OS: CachyOS (kernel 6.15.6-2-cachyos)
- DE: Gnome 48
- Compositor: Wayland

submitted by /u/CrazyPale3788
[link] [comments]

Hi, to start off I do not have linux myself, my boyfriend does. So idk if I spelt the name of his linux right haha, anyways, he’s been trying to get the sims 4 on his pc for about a month now and it doesn’t work at all. He can download EA and “install” the sims 4 but then cannot open the game, does anyone know why this is happening and how to fix it? He’s tried a bunch of things (i think) and nothing seems to work. He’s also tried using steam. Please give advice because I miss my sims (he deleted microsoft)

submitted by /u/funeral_eyes_
[link] [comments]

Hey all, I've been completely unable to get past the logo screen for a couple of months now. The problem occurs after a while of playing/playing and then quitting, I get the error shown in the image. Pressing cancel to debug doesn't actually pull up a debugger, just quits the game outright and pulls up the crash reporter. I'm really curious as to how something like this has happened, given I use the default Steam proton versions that I presumably haven't touched. I'd appreciate any help!

specifics:

• I've used most of Steam's proton versions
• I've looked at Proton DB, no one there seems to have my problem
• The crashing happens even if I uninstall and reinstall
• I've googled the error in the past and found nothing of value
• specs are down below, in full (if there's a more pleasant way of adding this much text, I'd greatly appreciate it if anyone could let me know!)

If I need to give any more information, just ask.

And, thank you!

https://preview.redd.it/gq96z7cubkcf1.png?width=1919&format=png&auto=webp&s=4e1b66493897ee8410fecede5e9bb0c5bba29aea

System: Kernel: 6.8.0-63-generic arch: x86_64 bits: 64 compiler: gcc v: 13.3.0 clocksource: tsc Desktop: Cinnamon v: 6.2.9 tk: GTK v: 3.24.41 wm: Muffin v: 6.2.0 vt: 7 dm: LightDM v: 1.30.0 Distro: Linux Mint 22 Wilma base: Ubuntu 24.04 noble Machine: Type: Desktop System: Gigabyte product: B760M C v: -CF serial: <superuser required> Mobo: Gigabyte model: B760M C v: x.x serial: <superuser required> uuid: <superuser required> UEFI: American Megatrends LLC. v: F9 date: 12/14/2023 CPU: Info: 6-core model: 12th Gen Intel Core i5-12400F bits: 64 type: MT MCP smt: enabled arch: Alder Lake rev: 5 cache: L1: 480 KiB L2: 7.5 MiB L3: 18 MiB Speed (MHz): avg: 1901 high: 2422 min/max: 800/4400 cores: 1: 2422 2: 800 3: 1949 4: 2315 5: 1880 6: 1842 7: 2201 8: 800 9: 2402 10: 1810 11: 2157 12: 2244 bogomips: 59904 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx Graphics: Device-1: NVIDIA AD107 [GeForce RTX 4060] vendor: Micro-Star MSI driver: nvidia v: 550.144.03 arch: Lovelace pcie: speed: 5 GT/s lanes: 8 ports: active: none off: DP-3,HDMI-A-1 empty: DP-1,DP-2 bus-ID: 01:00.0 chip-ID: 10de:2882 class-ID: 0300 Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 driver: X: loaded: nouveau unloaded: fbdev,modesetting,vesa failed: nvidia gpu: nvidia,nvidia-nvswitch display-ID: :0 screens: 1 Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1016x286mm (40.00x11.26") s-diag: 1055mm (41.55") Monitor-1: DP-4 pos: primary,right res: 1920x1080 dpi: 93 size: 526x296mm (20.71x11.65") diag: 604mm (23.76") modes: N/A Monitor-2: HDMI-0 pos: left res: 1800x1020 hz: 60 dpi: 286 size: 160x90mm (6.3x3.54") diag: 184mm (7.23") modes: N/A API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia device: 2 drv: swrast gbm: drv: nvidia surfaceless: drv: nvidia x11: drv: nvidia inactive: wayland,device-1 API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 550.144.03 glx-v: 1.4 direct-render: yes renderer: NVIDIA GeForce RTX 4060/PCIe/SSE2 API: Vulkan v: 1.3.275 layers: 8 surfaces: xcb,xlib device: 0 type: discrete-gpu driver: N/A device-ID: 10de:2882 device: 1 type: cpu driver: N/A device-ID: 10005:0000 Audio: Device-1: Intel Raptor Lake High Definition Audio vendor: Gigabyte driver: snd_hda_intel v: kernel bus-ID: 00:1f.3 chip-ID: 8086:7a50 class-ID: 0403 Device-2: NVIDIA vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: speed: 16 GT/s lanes: 8 bus-ID: 01:00.1 chip-ID: 10de:22be class-ID: 0403 API: ALSA v: k6.8.0-63-generic status: kernel-api Server-1: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin Network: Device-1: Intel Raptor Lake-S PCH CNVi WiFi driver: iwlwifi v: kernel bus-ID: 00:14.3 chip-ID: 8086:7a70 class-ID: 0280 IF: wlo1 state: up mac: <filter> Device-2: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet vendor: Gigabyte driver: r8169 v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 04:00.0 chip-ID: 10ec:8168 class-ID: 0200 IF: enp4s0 state: down mac: <filter> IF-ID-1: docker0 state: down mac: <filter> Bluetooth: Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) driver: btusb v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 bus-ID: 1-14:7 chip-ID: 8087:0aaa class-ID: e001 Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 5.1 lmp-v: 10 sub-v: 3061 hci-v: 10 rev: 3061 class-ID: 7c0104 Drives: Local Storage: total: 1.03 TiB used: 740.02 GiB (70.3%) ID-1: /dev/nvme0n1 vendor: Intel model: SSDPEKKW256G7 size: 238.47 GiB speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter> fw-rev: PSF109C temp: 34.9 C scheme: GPT ID-2: /dev/sda vendor: Kingston model: SA400S37480G size: 447.13 GiB speed: 6.0 Gb/s tech: SSD serial: <filter> fw-rev: 0103 scheme: MBR ID-3: /dev/sdb vendor: Generic model: STORAGE DEVICE size: 366.82 GiB type: USB rev: 3.0 spd: 5 Gb/s lanes: 1 tech: N/A serial: <filter> fw-rev: 0819 scheme: MBR Partition: ID-1: / size: 233.58 GiB used: 145.62 GiB (62.3%) fs: ext4 dev: /dev/nvme0n1p5 ID-2: /boot/efi size: 96 MiB used: 31.4 MiB (32.7%) fs: vfat dev: /dev/nvme0n1p1 Swap: ID-1: swap-1 type: file size: 16 GiB used: 2.93 GiB (18.3%) priority: -2 file: /swapfile USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 16 rev: 2.0 speed: 480 Mb/s lanes: 1 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-5:2 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s lanes: 1 power: 100mA chip-ID: 05e3:0608 class-ID: 0900 Hub-3: 1-6:3 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s lanes: 1 power: 100mA chip-ID: 05e3:0608 class-ID: 0900 Device-1: 1-7:4 info: China Resource Semico USB Keyboard type: keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s lanes: 1 power: 500mA chip-ID: 1a2c:4094 class-ID: 0300 Device-2: 1-8:5 info: Corsair M65 RGB ELITE Gaming Mouse type: mouse,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 500mA chip-ID: 1b1c:1b5a class-ID: 0300 serial: <filter> Device-3: 1-11:10 info: Integrated Express RGB LED Controller type: HID driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 048d:5702 class-ID: 0300 Device-4: 1-14:7 info: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 8087:0aaa class-ID: e001 Hub-4: 2-0:1 info: super-speed hub ports: 9 rev: 3.1 speed: 20 Gb/s lanes: 2 chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-8:2 info: Genesys Logic USB Storage type: mass storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s lanes: 1 power: 896mA chip-ID: 05e3:0747 class-ID: 0806 serial: <filter> Sensors: System Temperatures: cpu: 43.0 C mobo: 34.0 C gpu: nvidia temp: 57 C Fan Speeds (rpm): N/A gpu: nvidia fan: 0% Repos: Packages: 2617 pm: dpkg pkgs: 2587 pm: flatpak pkgs: 30 No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list 1: deb http: //packages.linuxmint.com wilma main upstream import backport 2: deb http: //archive.ubuntu.com/ubuntu noble main restricted universe multiverse 3: deb http: //archive.ubuntu.com/ubuntu noble-updates main restricted universe multiverse 4: deb http: //archive.ubuntu.com/ubuntu noble-backports main restricted universe multiverse 5: deb http: //security.ubuntu.com/ubuntu/ noble-security main restricted universe multiverse No active apt repos in: /etc/apt/sources.list.d/steam-beta.list Active apt repos in: /etc/apt/sources.list.d/steam-stable.list 1: deb [arch=amd64,i386 signed-by=/usr/share/keyrings/steam.gpg] https: //repo.steampowered.com/steam/ stable steam 2: deb-src [arch=amd64,i386 signed-by=/usr/share/keyrings/steam.gpg] https: //repo.steampowered.com/steam/ stable steam Active apt repos in: /etc/apt/sources.list.d/protonvpn-stable.sources 1: deb https: //repo.protonvpn.com/debian stable main Active apt repos in: /etc/apt/sources.list.d/winehq-jammy.sources 1: deb [arch=amd64 i386] https: //dl.winehq.org/wine-builds/ubuntu jammy main Info: Memory: total: 24 GiB available: 23.31 GiB used: 4.86 GiB (20.9%) Processes: 424 Power: uptime: 11h 58m states: freeze,mem,disk suspend: deep wakeups: 0 hibernate: platform Init: systemd v: 255 target: graphical (5) default: graphical Compilers: gcc: 13.3.0 Client: Cinnamon v: 6.2.9 inxi: 3.3.34 submitted by /u/RoyalBrilliant2654
[link] [comments]

I get the error: "DirectX 12 is not supported on your system.

Please update your Windows 10 64-bit operating system (version 1909 or later) and your graphics card driver. Ensure that your graphics card meets the minimum requirements (NVIDIA GTX 1060 or AMD RX 580)."

a lot of times when I try to launch marvel rivals from steam with the launch commands: SteamDeck=1 LD_PRELOAD="" gamemoderun %command% -dx12 -PSOCompileMode=1 -ngxdisableota -bNvidiaReflex=False

I use the proton version GE-Proton10-8, and I use NVIDIA RTX 2060 on Arch Linux with the kernel version 6.15.2-arch1-1 and NVIDIA Driver version 575.57.08, I also sometimes get the anti-cheat didn't fully work error after launching the game, please help

submitted by /u/bivacci
[link] [comments]

Kubuntu 25.04

TLDR: How can I scale down / offset the input from one axis of a joystick device?

I'm having a very specific problem in linux as a result of a hardware modification on my TWCS throttle. I have swapped in an upgraded throttle axis potentiometer as detailed in this post to fix throttle ghost inputs. While the dimensions of the potentiometer I'm using are physically an exact match, the new potentiometer has a wider angle, so the throttle movement covers less of the potentiometer's range than the factory potentiometer's. In windows this was not a problem, joy.cpl was able to calibrate accordingly, but in Linux I'm unable to correctly calibrate the throttle axis using jstest-gtk. The problem is that jstest-gtk caps the maximum input value from the axis at 32767. With the factory potentiometer this would no doubt be fine, but with the new potentiometer's larger range, the angle it reads exceeds what the factory potentiometer's did while the throttle is above about 50%. The result is that the cap of 32767 is reached before the throttle is actually completely forward, and because of the way jstest-gtk treats center points, the sensitivity in the 50-100% throttle range is double that of the sensitivity in the 0-50% range.

Here's a video of the issue (the axis in question is #2), with raw joystick inputs being read from evtest on the right, sdl-jstest on the bottom to show the raw data somewhat graphically, and jstest-gtk at the top. About halfway through I reset the jstest-gtk calibration to show what the throttle does with raw inputs.

https://reddit.com/link/1lyix1b/video/sl575i3e8kcf1/player

My question: How can I calibrate this axis since it goes past 32767? Could I possibly scale the input down before it reaches jstest-gtk? (I'm thinking about something like a bitshift to cleanly divide by two). If not, is there some way to calibrate it using some other software which does not have this limit?

submitted by /u/QuirtTheDirt
[link] [comments]

Hi everyone!

As the title says, I finally decided to change my main OS, I chose Ubuntu because I'm already used to it, most of my servers run on ubuntu server.

I just got done customizing everything to my liking so now I'm setting up my games.
I noticed that on Linux my GPU (Nvidia 3080ti) is making a coil whining sound on demanding games, it never happen to me under windows.

Anyone knows what I could check and test to resolve this or there's nothing that can be done about it?

submitted by /u/Captain_C21H30O2
[link] [comments]

Basically the title. It only seems to work with the laptop integrated graphics card but I can't get it working on the dGPU by any means as for now.

Distro: Arch Linux
DE: Plasma 6
CPU: Ryzen 6900HX
iGPU: Radeon 680M
dGPU: RTX 3050 Mobile

submitted by /u/TechManWalker
[link] [comments]

I can't get my Board to post I was using Ubuntu on it and walked away for a while now refuses to post I think I properly cleared the CMOS I took out the battery and moved the jumper but still nothing can't even get to bios

submitted by /u/MrcaptainsirIII
[link] [comments]

I’m streaming games via Moonlight from my main Windows PC to a Linux client connected to my tv (Ubuntu with GTX 1060). Everything is working well except that the PS5 controller's touchpad is controlling the mouse on the Linux side, which is causing issues with certain games. For example, when playing Spiderman with a PS5 controller you need to use the touchpad button the open the map. I want to disable only the mouse movement on the touchpad, and restore its original functionality.

Also, when streaming, Steam on the host pc detects the PS5 controller as a PS4 controller, so I’m not getting adaptive triggers or full DualSense support.

Any ideas how to:

1. Stop the touchpad from acting like a mouse
2. Get full DualSense features when streaming

Thanks!

submitted by /u/wvpotato
[link] [comments]

Is that okay? I've searched on this sub and I tried installing the open source launcher on github but I couldn't get it to work. So I gave up and installed the game on hoyoplay. Will it get my account banned? I only just installed linux a week ago so I don't really know what I'm doing.

submitted by /u/xauyein
[link] [comments]

I've been working on a tool that configures various Linux settings to try to squeeze out as much performance as possible, while keeping everything as user friendly as it can be.

The program now includes two renderer switchers (GPU Tab -> Render Selector), one for OpenGL and another for Vulkan. Example of how it works for OpenGL:
It uses glxinfo to get a list of available GPUs/renderers by testing various environment variables. It then saves the matching environment variables associated with each renderer string. Users can simply pick the desired GPU/renderer from a dropdown without needing to deal with the variables. Once the apply button its clicked the env vars are added to a script called `volt`.

The Vulkan selector works similarly, using vulkaninfo to identify and the Mesa Vulkan Layer to configure available devices (it works for NVIDIA too, i have myself a GT710 with the 470 drivers).

If anyone has a system with multiple GPUs and wants to give it a try, feedback would be really appreciated.
glxinfo is required for the OpenGL selector, and vulkaninfo along with the Mesa Vulkan Layer is needed for the Vulkan selector.

RC builds are available, as the switchers are very untested.
For source code, check the experimental branch.

RC builds: link
volt-gui experimental branch: link
about me: link

submitted by /u/Ok-Pace-1900
[link] [comments]

After more then a year I decided to play a VR game again.

But the SteamVR Home looks absolutely terrible. Also tried the SteamVR beta, as well as X instead of Wayland, but nomatter what I do, the SteamVR Home has a massive „tearing“ (not sure if it‘s the right word here) issue.

It was never good on Linux, but now it‘s really terrible.

Weirdly enough all games (both native and Proton) still work fine, no issues there.

submitted by /u/Liemaeu
[link] [comments]

You know that moment when you finally take the plunge? You wipe Windows, install Linux (in my case, Fedora), and dive in, full of hope, excitement, and maybe a little fear.

I was ready. I'd watched all the videos, read all the blogs, and told myself, "I got this."

But then came that inevitable moment: I got stuck. Something that would’ve been obvious to me on Windows suddenly felt impossible to figure out. So yeah, I have a confession! I used ChatGPT.

And honestly? It helped. A lot. I’d ask a question, describe what I was trying to do, and it would usually give me a solid answer, sometimes even the exact command I needed. Huge time-saver when you just want to get back to doing stuff.

But here’s the catch:
It’s so easy to run a command, fix the problem, and move on… and forget everything. Unless you’re documenting it or asking ChatGPT to explain things like you’re five, it’s just:
“Something something terminal... now it works.” Until it doesn’t.

Compared to Google (which now also shows AI answers before a stack of outdated forum posts) or Reddit (which is chaos but often enlightening), ChatGPT gives one clean answer. But no community input, no broader context, no why.

So I adjusted.
Now I ask it to explain everything like I’m a beginner (cause I am), including risks, alternatives, and what the command actually does. That’s when it stopped being just a shortcut and became a genuine learning tool.

Not saying it's a replacement for man pages, forums, reddit or YouTube tutorials, but it’s earned a place in my Linux toolkit.

Curious how others feel:

• Have you used ChatGPT (or other AI tools) for Linux troubleshooting?
• Did it help you learn or just patch stuff?
• Any horror stories? Big wins?

Video version for those that might prefer audio/visual https://youtu.be/ZWbBMhe_RVo

submitted by /u/TheRedSpaceRobot
[link] [comments]