im launching sober, it opens and i join a game , 1 minute later game freezes like it loses internet connection and it just closes. does someone know what is causing this and how to fix it ?

submitted by /u/Mergetsu_1
[link] [comments]

Hey guys.

i want to try FSR with BeamNG and i know i could do it with gamescope but it won't launch. I tried other games with gamescope without any issues. So far BeamNG is the only game that does not work.

i tried gamescope -- %command% wich should be the simplest form, but no luck.
I also tried basically all flags in different combinations - with no luck.

The Launcher starts but when i select "Play" or "Play Vulkan" it just ends the game.

I dont know how i could start the game like in the terminal with verbose output so that i could check whats happening. Maybe someone can tell me how to do something like that.

I'm on Fedora 42 by the way.
AMD RX5700 XT
Mesa 25.0.7
I've tried Proton 9.0-4, GE 10-4, GE 9-27, 8.0-5, 10.0-1 (Beta)

submitted by /u/DachSolutions
[link] [comments]

When the mod crash there Is no error message so i don't ever know what cause the crash, Is not a computer problem, because the mod work on Windows

submitted by /u/iLOVEallMODS
[link] [comments]

I'm eyeing a laptop with a 2.8K screen, 16:10 (2880x1800 - Thinkpad OLED) or 3:2 (2880x1920 Framework 120hz IPS). I play all kinds of emulators such as Playstation 1 and 2 and others, various older games in Bottles/Lutris and new titles that will work on the Ryzen iGPU (only playing on iGPU). Am I gonna face any issues playing on a screen like this?

The thing I worry the most is that these are hiDPI screens and to get better performance I will have to set the game resolution to exactly 4x less pixels, so to 1440x900 or 1440x960, so that 4 pixels correspond to 1 pixel - no loss due to imperfect scaling. These are very non standard resolutions, I worry they may not be an option or something else may be an issue.

These are very popular laptops so and I'm sure many here have a 2.8K screen, so I hope this will be easy to answer.

PS Is 90hz supported OOB on Linux on the Thinkpad 2.8K OLEDs?

submitted by /u/Southern-Trainer4337
[link] [comments]

Does anyone know how to make a command to run gzdoom flatpak with mods? I'm long trying and so far nothing now.

submitted by /u/batatan234
[link] [comments]

I recently bought a Dualsense controller with a good discount, for playing my games on my PC Desktop. My OS is OpenSuse Tumbleweed.

I can't find out how to know what the battery life left is. I googled and still could not find it. Maybe I used the wrong words in the search bar? I don't know.

Also: If anybody can tell me how I can turn of vibration and the LED lights to save battery time, I would appreciate big time.

Thanks in advance.

submitted by /u/EverlastingPeacefull
[link] [comments]

I finally chucked windows and have Linux mint. There seem to be so many different options when it comes to gaming then when I played around with it in the past that I feel a bit overwhelmed. I got steam and heroic put on then someone said I should try Lutris and that program freaked me out (no clue what I was doing) but seems to be working so I guess Linux did something right. Now I’m wondering if there is a way without exploding my brain that I can mod my games.

submitted by /u/SolusUmbra
[link] [comments]

Hi there,

for a couple weeks or months I've been playing ANNO 1800 (Ubisoft edition, so Ubisoft connect required, but no steam required, as opposed to the steam edition that requires both) through Lutris successfully. I've been using this anno 1800 lutris config for that purpose: https://lutris.net/games/anno-1800/

I was gone for a couple days and now as of this weekend, I can no longer launch the game - I assume there was a recent silent update to the launcher? The Ubisoft Connect launcher already seems to struggle to load up, but now I can only occasionally make it into the game, and when I do, the main menu is so extremely choppy that I cannot possibly load my saved game.

Does anyone else have a similar experience with any Ubisoft titles recently? Any suggestions what I could try? Or do I have to wait it out, until people more clever than me submit fixed either to Ubisoft Connect (as Ubi employees) or to wine/proton/lutris/whatever would be doing the magic here? Cheers!

submitted by /u/userrr3
[link] [comments]

As title says, game launches absolutely fine but as soon as it passes the splash screens and gets to the title menu with all the options, the game immediately crashes to desktop.

I've checked ProtonDB and nobody else seems to have this issue, although I'm using Arch with the latest Mesa and kernels so perhaps this is a regression of some kind? I've already submitted my report on ProtonDB.

I've tried using different versions of Proton such as GE 10-4, 9-27, the latest 9.0 version and some of the older vanilla Proton versions to no avail. Also tried -vulkan, and turning off fsync and esync in the launch options, again, no dice.

Is anybody else encountering this?

submitted by /u/stinklover697
[link] [comments]

Bonjour, j'ai besoin d'aide
Je joue à une rom gamecube sur lutris. J'utilisais libretro et la manette fonctionnait. Mais je vouslais de meilleurs graphismes, alros chatgpt m'a conseillé de dl dolphin et de faire les adaptations nécessaires et de changer le runner pour dolphin. Mais maintenant la manette ne fonctionne plus. J'ai configuré la manette sur dolphin, la manette fonctionne via dolphin mais impossible quand je lance la rom via lutris.
J'ai perdu 2h avec chatgpt et deepseek : changement variables d'environnements, et tout un milliards de commande qui soit n'existent pas, soit ne fonctionne pas.

Je peux y jouer avec libretro mais les graphismes sont pas améliorables il me semble, je peux jouer directement via dolphin mais à quoi me sert lutris maintenant, ou jouer via lutris avec libretro mais le jeu est moche

Issue:
I'm trying to play a GameCube ROM through Lutris. Originally, I used Libretro, and my controller (Xbox One S) worked fine, but the graphics were subpar. Following advice from ChatGPT, I:

1. Installed Dolphin
2. Configured the controller in Dolphin (works perfectly when launched directly)
3. Switched Lutris' runner to Dolphin

Now, the controller doesn’t work when launching through Lutris, despite functioning in standalone Dolphin. I’ve wasted 2 hours trying:

• Environment variables (SDL_JOYSTICK_DEVICE, DISABLE_LUTRIS_INPUT, etc.)
• Terminal commands (permissions, udev rules, etc.) – most were either invalid or ineffective

Current Workarounds (Unsatisfactory):

• Libretro: Controller works, but graphics can’t be improved.
• Standalone Dolphin: Works perfectly, but defeats Lutris’ purpose.

Question:
How can I make Lutris pass the controller input to Dolphin correctly? Or should I abandon Lutris for GameCube emulation?

(Note: I’ve already ruled out basic issues – the controller is detected in evtest and works in Dolphin.)

Key Details for Troubleshooting:

• OS: Ubuntu 24.04
• Lutris Version: 5.10+
• Controller: Xbox One S (via USB)
• Error: No visible errors – just no input in Lutris-launched Dolphin.

submitted by /u/Ok-Rent9429
[link] [comments]

Over a few months I have been progressively switching to EndeavorOS and as much away from Windows 10 as possible. But there is still some issues regarding my flightsimming hobby. One is the Tobii Eyetracker 5 not being supported and thus Opentrack not working properly. There is no obvious solution to that one.

My main issue here is my Winwing Orion2 Joystick not being recognised as such by Steam/proton (Arch package version).

It is responsive via evtest and works to it's full capacity (all buttons and axis respond accordingly) in Linux native games like X4. Proton insists on not making it appear but I can turn it into an XBox controller via Steam input. So it does see it. But mapping it that way I cannot use it to it's full potential of buttons and axis.

What can I do to make that device pass through ?

submitted by /u/Falrhynn
[link] [comments]

submitted by /u/YanderMan
[link] [comments]

Hi good folk of the linux gaming sub, I'm hoping someone may be able to offer some insight on a problem I'm having.

I am trying to install reshade for a dx9 title that I am using vulkan for, but I can't seem to get things working. Basically, I am trying to use the dxvk HDR mod to upgrade bit depth, swapchain etc to HDR. This works well and results in an HDR output - but it requires a tonemapping pass with Advanced Auto HDR to get it over the line, and I can't seem to hook reshade.

More information:

• using d3d9.dll and dxvk.conf files in directory
• using reshade 6.5.1 with addon support
• using protontricks to explore registry for the title Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Khronos\Vulkan\ImplicitLayers shows a REG_DWORD key that references ReShade32.json in pfx\drive_c\ProgramData\ReShade which is indeed there alongside ReShade32.dll

Any insight would be appreciated, I'd like to find a solution to this so that I can advise on a method for applying AutoHDR for Steam Deck users running dx9 titles.

submitted by /u/Gizzburt
[link] [comments]

submitted by /u/YanderMan
[link] [comments]

Hey everyone,

I recently decided to try Linux as my main OS and went with CachyOS as my distro. I installed the gaming packages provided in the CachyOS wiki, and so far most of the games I play run great — except Marvel Rivals.

I'm using the RADV driver and launch the game with the following arguments:

RADV_PERFTEST=gpl MANGOHUD=1 gamemoderun %command%

Despite that, the framerate is terrible — around 35 to 65 FPS, fluctuating heavily.

I’ve seen other users with AMD cards get much better performance in Rivals under Linux, so I’m not sure what’s going wrong in my case.

Is anyone here running Marvel Rivals with good performance on a similar setup? Would love to hear your launch config or driver tweaks if you’ve got it working smoothly.

My setup:

• OS: CachyOS Linux
• Kernel: 6.15.2-2-cachyos
• DE: KDE Plasma 6.3.5 (Wayland)
• CPU: Intel Core i9-13900K (32 threads)
• GPU: AMD Radeon RX 7900 XTX
• Motherboard: Gigabyte Z790 AERO G
• RAM: 32 GiB DDR5

Thanks in advance for any advice!

submitted by /u/NanoDoom
[link] [comments]

Ciao a tutti, sono un utente Fedora 42 ormai da qualche mese. Ho una GPU NVIDIA RTX 4060 Laptop e una CPU Intel i9 di ultima generazione. Ho iniziato recentemente a giocare su Linux usando Lutris con backend Wine (e a volte Wine-GE). Sto cercando di far partire alcuni giochi, ma riscontro gravi problemi di performance: tutti vanno a scatti o con framerate molto basso, anche titoli poco esigenti.

Ho già provato: • Driver NVIDIA aggiornati (uso i driver proprietari tramite RPM Fusion) • DXVK abilitato in Lutris • Vari ambienti Wine (standard, GE, staging) • Disattivare il V-Sync e abbassare i dettagli grafici • Launch options suggerite online • Gioco lanciato da SSD NVMe

Non riesco a capire se è un problema di configurazione, di compatibilità o di altro.

Qualcuno con esperienza su Fedora e Lutris/Wine ha suggerimenti su come ottimizzare le prestazioni?

Grazie in anticipo!

submitted by /u/ema4591
[link] [comments]

Hi everyone, a question if any of you have been playing ER Nightreign , have you experiensed any issues ? Protondb reviews seem to be pretty mixed and I myself have been having pretty bad time, game keeps freezing ( sometimes the entire system ) and what's worse, systematically crashing to desktop.

I've tried differsnt proton versions, different nvidia drivers , ( I'm on nvidia ) even tried ruling out os by trying other distro ( that was unnecessary, but just in case ).

ruled out my system too, my build is, i5 14400f , 32 ram 5600 and rtx 4060 8gig. system load is pretty low, temp never goes high, ( 50 ° max for cpu 70-72 ° max for gpu.

so gotta be game or anti cheat issue.

have any of you experienced the same with this game ?

submitted by /u/grandy_1955
[link] [comments]

I just installed lunix (Pop - OS) and installed steam and overwatch.

It is stuck on this screen and I'm not sure what went wrong?

Any help would be deeply appreciated :)

submitted by /u/JuggernautStreet8614
[link] [comments]

I've recently been having a major issue with trying to play Total War Warhammer 3 on my Nobara 42 PC with GE-Proton 10-4; the game tends to hitch and stutter on loading screens and semi-frequently causes the game and my PC to crash requiring a restart. Otherwise on both the campaign and battle layers the game runs fine. I know this isn't an issue of insufficient hardware as my system (9800X3D, 7900 XTX, 32 GB RAM) runs far more intensive games like MH Wilds with minimal issues, so it may be due to my choice of Proton or launch options. Alternatively, I have heard about the Steam Deck having memory leak issues with the game, so it could possibly be a similar issue on my own computer. Nonetheless, if anyone else has had similar experiences and managed to resolve them, your advice would be greatly appreciated.

submitted by /u/SWAZZBOOM0131
[link] [comments]

I wanna play Ragecoop which requires the above with an Friend who than would have an Network internal Server...

When i start the Game with that lauchoption via steam (Bought and installed via Steam) and then click on "Story Mode" the Game crashes after some time...

Launchoption:

"WINEDLLOVERRIDES="dinput8=n" %command%"

I dont think i have the wrong game version because i transferd GTAV from my Windows PC where everything works like it should

I have the latest Version of GTA 5 Legacy, Scripthook V and i use the Nightly version of Scripthookdotnet because RAGEcoop asks for it

submitted by /u/ElitesoldierWar
[link] [comments]