This might be a dumb question, but here goes--

I'm pretty experienced with linux servers for my job, but I'm new to using linux for gaming/personal use. I have a Fedora system. I understand that proton is some sort of compatibility layer built into steam, similar to wine. I can see Proton has a database of game support, and sometimes games are listed at "native". For example, I've been playing silksong and can see it listed as native here. What exactly does that mean?

My understanding is that "native support" means the devs have compiled the game so that it can run without emulation on linux. However when I actually look at the silksong in my file directory, I see an .exe file which can't be run directly. When I open steam, it presents several different options for proton-- for example I see "Proton 9.0-4" or "Proton Hotfix" to pick from. In my case the latest proton version works but several other options I tried (including the default) just freeze on launch.

When I play the game it mostly works ok, but I do have some visual glitches that appear during cutscenes, as if it can't load or render them correctly. This made me think I should disable the compatability layer and just run the game directly. But I see no option in steam to do this, and I also can't run any of the game files directly outside of steam. It's not the end of the world but I'm trying to understand what exactly is going on here:

• Does "Native support" in proton's database not actually mean there's a native compiled binary? Does it just mean it's been tested to work as well as a native program?
• Does steam always use proton for every single game, even ones that do have an official linux version? I don't see any option to disable the compatibility layer overall or per-game.

Thanks!

submitted by /u/pancake117
[link] [comments]

Hi, I'm having an issue where Call of Duty Black Ops 3 crashes after about a minute on both my Framework 16 Laptop with 780m Graphics and desktop with 9070 xt.

Is there a fix? Does this happen on other distros too? I don't remember it happening on Arch, but I haven't played this game for a while maybe this is a new issue?

I'm on Fedora 42 and Linux kernel 6.16.5.

submitted by /u/Important-Permit-935
[link] [comments]

I have a 13 inch 2020 m1 MacBook Pro and bassite won't support apple silicon for a while so is there another alternative

submitted by /u/ohiosigma360
[link] [comments]

submitted by /u/T0RU2222222222222222
[link] [comments]

I’ve been using Windows for a long time but recently switched to Linux (Ubuntu).

I bought a PS4 controller (DualShock 4) and since my PC doesn’t have built-in Bluetooth, I got a USB Bluetooth adapter.

The issue is: when I pair the controller, Ubuntu detects it in the Bluetooth settings and even notifies me that it’s connected, but it doesn’t actually work. The controller doesn’t respond in Steam or in any emulator, it’s basically “dead” even though it shows as paired.

When I use the controller with a USB cable, it works perfectly and Steam recognizes it, but I really want to play wirelessly using Bluetooth.

Can anyone with experience explain how to properly pair and get a DualShock 4 working on Ubuntu via Bluetooth so it works in Steam or emulators? 🙏

Any guide, commands, or drivers that can help would be greatly appreciated.

submitted by /u/Much_Cheesecake7345
[link] [comments]

https://preview.redd.it/owdx87bon0pf1.jpg?width=2560&format=pjpg&auto=webp&s=93e205e4081c51d97077b7007d7f5930b153d73c

I'm on Arch, and have used the default and OpenGL versions of the game. When launched in Proton everything looks right.

submitted by /u/Augratin_potatoes
[link] [comments]

https://preview.redd.it/d7cuj0vkm0pf1.png?width=2560&format=png&auto=webp&s=e666909b0e127a25d768c17590d37e45b20991f8

https://preview.redd.it/rxni5ghum0pf1.png?width=1452&format=png&auto=webp&s=32c23d04e077b1a9c3a1f8fb125dcc11b940e5dd

I've never seen this issue before and I wasn't able to find anything like this with a fix that worked.

submitted by /u/RubberDuckyDJ24
[link] [comments]

i desparetely dont want to deal with win. Is there a way to play like gta rp on win, through linux? like to open my win install in some box thingie and do what i need? xD

submitted by /u/RookTheRH
[link] [comments]

So i really want to play rust with my friends, and since proton cant play EAC servers, i set up a virt manager machine to play rust. Rust works, and i can join servers, but the performance is really bad. It seems like it is always between 40-55, no matter what settings i change. CPU, GPU, RAM, and Disk usage is all not even near 80% yet i get this performance. From time to time it can dip all the way down to 10-15 fps for a few seconds, and then goes back to about 50. I have tried everything i can, and nobody seems to know the issue. Here is my XML: <domain type="kvm">

<name>win11</name>

<uuid>939393c2-b398-4d08-bb52-27d73e8d2663</uuid>

<metadata>

<libosinfo:libosinfo xmlns:libosinfo="http://libosinfo.org/xmlns/libvirt/domain/1.0">

<libosinfo:os id="http://microsoft.com/win/11"/>

/libosinfo:libosinfo

</metadata>

<memory unit="KiB">32284672</memory>

<currentMemory unit="KiB">32284672</currentMemory>

<memtune>

<hard\_limit unit="KiB">37748736</hard\_limit>

</memtune>

<memoryBacking>

<hugepages/>

<locked/>

</memoryBacking>

<vcpu placement="static">12</vcpu>

<iothreads>1</iothreads>

<cputune>

<vcpupin vcpu="0" cpuset="2"/>

<vcpupin vcpu="1" cpuset="10"/>

<vcpupin vcpu="2" cpuset="3"/>

<vcpupin vcpu="3" cpuset="11"/>

<vcpupin vcpu="4" cpuset="4"/>

<vcpupin vcpu="5" cpuset="12"/>

<vcpupin vcpu="6" cpuset="5"/>

<vcpupin vcpu="7" cpuset="13"/>

<vcpupin vcpu="8" cpuset="6"/>

<vcpupin vcpu="9" cpuset="14"/>

<vcpupin vcpu="10" cpuset="7"/>

<vcpupin vcpu="11" cpuset="15"/>

<emulatorpin cpuset="0,9"/>

<iothreadpin iothread="1" cpuset="9"/>

</cputune>

<sysinfo type="smbios">

<bios>

<entry name="vendor">LENOVO</entry>

<entry name="version">M1UKT45A</entry>

<entry name="date">07/11/2019</entry>

<entry name="release">1.0</entry>

</bios>

<system>

<entry name="manufacturer">LENOVO</entry>

<entry name="product">ThinkCentre</entry>

<entry name="version">1.0</entry>

<entry name="serial">LNV-SYS-7C01A1</entry>

<entry name="uuid">939393c2-b398-4d08-bb52-27d73e8d2663</entry>

<entry name="sku">LNV-SKU-7C01</entry>

<entry name="family">Lenovo</entry>

</system>

<baseBoard>

<entry name="manufacturer">LENOVO</entry>

<entry name="product">20BE0061MC</entry>

<entry name="version">0B98401 Pro</entry>

<entry name="serial">LNV-BRD-9F21Z3</entry>

<entry name="asset">No Asset Tag</entry>

</baseBoard>

<chassis>

<entry name="manufacturer">LENOVO</entry>

<entry name="version">1.0</entry>

<entry name="serial">LNV-CHS-4E8820</entry>

<entry name="asset">No Asset Tag</entry>

<entry name="sku">Type3Sku1</entry>

</chassis>

<oemStrings>

<entry>LENOVO:System Config</entry>

</oemStrings>

</sysinfo>

<os firmware="efi">

<type arch="x86\_64" machine="pc-q35-8.2">hvm</type>

<firmware>

<feature enabled="yes" name="enrolled-keys"/>

<feature enabled="yes" name="secure-boot"/>

</firmware>

<loader readonly="yes" secure="yes" type="pflash" format="raw">/usr/share/OVMF/OVMF_CODE_4M.ms.fd</loader>

<nvram template="/usr/share/OVMF/OVMF\_VARS\_4M.ms.fd" templateFormat="raw" format="raw">/var/lib/libvirt/qemu/nvram/win11_VARS.fd</nvram>

<smbios mode="sysinfo"/>

</os>

<features>

<acpi/>

<apic/>

<hyperv mode="custom">

<relaxed state="on"/>

<vapic state="on"/>

<spinlocks state="on" retries="8191"/>

<vpindex state="on"/>

<runtime state="on"/>

<synic state="on"/>

<stimer state="on"/>

<reset state="on"/>

<vendor\_id state="on" value="792142387467"/>

<frequencies state="on"/>

</hyperv>

<kvm>

<hidden state="on"/>

</kvm>

<vmport state="off"/>

<smm state="on"/>

<ioapic driver="kvm"/>

<ps2 state="off"/>

</features>

<cpu mode="host-passthrough" check="none" migratable="on">

<topology sockets="1" dies="1" clusters="1" cores="6" threads="2"/>

</cpu>

<clock offset="utc">

<timer name="rtc" tickpolicy="catchup" track="guest"/>

<timer name="pit" tickpolicy="delay"/>

<timer name="hpet" present="yes"/>

<timer name="hypervclock" present="yes"/>

</clock>

<on\_poweroff>destroy</on\_poweroff>

<on\_reboot>restart</on\_reboot>

<on\_crash>destroy</on\_crash>

<pm>

<suspend-to-mem enabled="no"/>

<suspend-to-disk enabled="no"/>

</pm>

<devices>

<emulator>/usr/bin/qemu-system-x86_64</emulator>

<disk type="file" device="disk">

<driver name="qemu" type="raw" cache="none" io="io\_uring" discard="unmap" iothread="1"/>

<source file="/var/lib/libvirt/images/vol.img"/>

<target dev="sda" bus="virtio"/>

<serial>ST1000DM003-1ER162</serial>

<boot order="1"/>

<address type="pci" domain="0x0000" bus="0x06" slot="0x00" function="0x0"/>

</disk>

<controller type="usb" index="0" model="qemu-xhci" ports="15">

<address type="pci" domain="0x0000" bus="0x02" slot="0x00" function="0x0"/>

</controller>

<controller type="pci" index="0" model="pcie-root"/>

<controller type="pci" index="1" model="pcie-root-port">

<model name="pcie-root-port"/>

<target chassis="1" port="0x10"/>

<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x0" multifunction="on"/>

</controller>

<controller type="pci" index="2" model="pcie-root-port">

<model name="pcie-root-port"/>

<target chassis="2" port="0x11"/>

<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x1"/>

</controller>

<controller type="pci" index="3" model="pcie-root-port">

<model name="pcie-root-port"/>

<target chassis="3" port="0x12"/>

<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x2"/>

</controller>

<controller type="pci" index="4" model="pcie-root-port">

<model name="pcie-root-port"/>

<target chassis="4" port="0x13"/>

<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x3"/>

</controller>

<controller type="pci" index="5" model="pcie-root-port">

<model name="pcie-root-port"/>

<target chassis="5" port="0x14"/>

<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x4"/>

</controller>

<controller type="pci" index="6" model="pcie-root-port">

<model name="pcie-root-port"/>

<target chassis="6" port="0x15"/>

<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x5"/>

</controller>

<controller type="pci" index="7" model="pcie-root-port">

<model name="pcie-root-port"/>

<target chassis="7" port="0x16"/>

<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x6"/>

</controller>

<controller type="pci" index="8" model="pcie-root-port">

<model name="pcie-root-port"/>

<target chassis="8" port="0x17"/>

<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x7"/>

</controller>

<controller type="pci" index="9" model="pcie-root-port">

<model name="pcie-root-port"/>

<target chassis="9" port="0x18"/>

<address type="pci" domain="0x0000" bus="0x00" slot="0x03" function="0x0" multifunction="on"/>

</controller>

<controller type="pci" index="10" model="pcie-root-port">

<model name="pcie-root-port"/>

<target chassis="10" port="0x19"/>

<address type="pci" domain="0x0000" bus="0x00" slot="0x03" function="0x1"/>

</controller>

<controller type="pci" index="11" model="pcie-root-port">

<model name="pcie-root-port"/>

<target chassis="11" port="0x1a"/>

<address type="pci" domain="0x0000" bus="0x00" slot="0x03" function="0x2"/>

</controller>

<controller type="pci" index="12" model="pcie-root-port">

<model name="pcie-root-port"/>

<target chassis="12" port="0x1b"/>

<address type="pci" domain="0x0000" bus="0x00" slot="0x03" function="0x3"/>

</controller>

<controller type="pci" index="13" model="pcie-root-port">

<model name="pcie-root-port"/>

<target chassis="13" port="0x1c"/>

<address type="pci" domain="0x0000" bus="0x00" slot="0x03" function="0x4"/>

</controller>

<controller type="pci" index="14" model="pcie-root-port">

<model name="pcie-root-port"/>

<target chassis="14" port="0x1d"/>

<address type="pci" domain="0x0000" bus="0x00" slot="0x03" function="0x5"/>

</controller>

<controller type="pci" index="15" model="pcie-root-port">

<model name="pcie-root-port"/>

<target chassis="15" port="0x1e"/>

<address type="pci" domain="0x0000" bus="0x00" slot="0x03" function="0x6"/>

</controller>

<controller type="pci" index="16" model="pcie-to-pci-bridge">

<model name="pcie-pci-bridge"/>

<address type="pci" domain="0x0000" bus="0x0a" slot="0x00" function="0x0"/>

</controller>

<controller type="sata" index="0">

<address type="pci" domain="0x0000" bus="0x00" slot="0x1f" function="0x2"/>

</controller>

<controller type="virtio-serial" index="0">

<address type="pci" domain="0x0000" bus="0x03" slot="0x00" function="0x0"/>

</controller>

<interface type="network">

<mac address="02:ab:7c:31:92:ee"/>

<source network="default"/>

<model type="virtio"/>

<rom enabled="no"/>

<address type="pci" domain="0x0000" bus="0x01" slot="0x00" function="0x0"/>

</interface>

<serial type="pty">

<target type="isa-serial" port="0">

<model name="isa-serial"/>

</target>

</serial>

<console type="pty">

<target type="serial" port="0"/>

</console>

<tpm model="tpm-crb">

<backend type="emulator" version="2.0"/>

</tpm>

<sound model="ich9">

<address type="pci" domain="0x0000" bus="0x00" slot="0x1b" function="0x0"/>

</sound>

<audio id="1" type="none"/>

<hostdev mode="subsystem" type="pci" managed="yes">

<source>

<address domain="0x0000" bus="0x03" slot="0x00" function="0x1"/>

</source>

<address type="pci" domain="0x0000" bus="0x05" slot="0x00" function="0x0"/>

</hostdev>

<hostdev mode="subsystem" type="pci" managed="yes">

<source>

<address domain="0x0000" bus="0x03" slot="0x00" function="0x0"/>

</source>

<address type="pci" domain="0x0000" bus="0x07" slot="0x00" function="0x0"/>

</hostdev>

<hostdev mode="subsystem" type="pci" managed="yes">

<source>

<address domain="0x0000" bus="0x03" slot="0x00" function="0x3"/>

</source>

<address type="pci" domain="0x0000" bus="0x08" slot="0x00" function="0x0"/>

</hostdev>

<hostdev mode="subsystem" type="pci" managed="yes">

<source>

<address domain="0x0000" bus="0x03" slot="0x00" function="0x2"/>

</source>

<address type="pci" domain="0x0000" bus="0x09" slot="0x00" function="0x0"/>

</hostdev>

<hostdev mode="subsystem" type="usb" managed="yes">

<source>

<vendor id="0x03f0"/>

<product id="0x0591"/>

</source>

<address type="usb" bus="0" port="1"/>

</hostdev>

<hostdev mode="subsystem" type="usb" managed="yes">

<source>

<vendor id="0x1038"/>

<product id="0x183c"/>

</source>

<address type="usb" bus="0" port="2"/>

</hostdev>

<watchdog model="itco" action="reset"/>

<memballoon model="none"/>

<shmem name="looking-glass">

<model type="ivshmem-plain"/>

<size unit="M">32</size>

<address type="pci" domain="0x0000" bus="0x10" slot="0x01" function="0x0"/>

</shmem>

</devices>

</domain>

submitted by /u/Few_Mousse_8751
[link] [comments]

I have a thrustmaster TMX Force feedback wheel which I used a lot before I switched from Windows and I really want to use it on linux, are there drivers I can get for it

submitted by /u/Valkonical
[link] [comments]

I recently made the switch to Linux (Debian) from Win11 on my daily machine. Said machine is a 12th Gen Intel Core i7 laptop with only 16 GB of ram and an Intel iGPU. So the reduced bloat from Win to Deb actually increased the performance of most of my games, which has been great.

However, when I launched Way of the Hunter via Steam, I was greeted with this yellow overlay across the whole screen as pictured above. I have all graphics setting at min and tried switching the Proton compatibility layer to GE-Proton10-15, but the issue persists.

Has anyone run into this before? Any tips for diagnosing or fixing it would be hugely appreciated. I’d love to get it running normally again.

submitted by /u/Lightspeed-Radar
[link] [comments]

Heroic only works for games that you already have purchased or you can also download pirated ones. Well, my question is that I tried to download Need for Speed 2005 but it doesn't run the installer, which in Lutris it does let me install and run.

submitted by /u/Javis_117
[link] [comments]

Hello,

I need a hand with finding a file that is usually stored in roaming on windows (%appdata%) the game in question is satisfactory and im trying to just add a line to the graphics config ini. As one of the graphics options is bugged. Adding this line fixes it and would help my cpu keep up as my factory gets to a ridiculous size.

However I cannot find where steam stores config files on my linux system. im running mint.

Thank you for your time!

submitted by /u/Nazeracoo
[link] [comments]

For some reason whenever I use Protontricks on AC Unity it will come up with an "Unknown file arch" everytime. I'm using GE-Proton10-15 as my compatibility layer. I'll try and switch to Proton Experimental and other Proton layers and see if it works.

What should I do otherwise?

submitted by /u/slipppyy
[link] [comments]

For most games I've been able to get trainers work pretty painlessly with the PROTON_REMOTE_DEBUG_CMD launch command, but one game, Battlefleet Gothic Armada 2, continues to be the exception. I am using the Cheatappens trainer (https://www.cheathappens.com/70253-PC-Battlefleet-Gothic-Armada-2-trainer) and my orignal issue was an error saying I needed ".NET Core". I used protontricks and installed al 3 versions of ".NET Core" and now I have a different issue. The old error no longer appears, but now I only get a transparent window that pulls a "no longer responding" error immediately.

I'm guessing there's more Windows DLLs/Components I need to install on Protonicks, but that list is pretty damn long so I'd appreciate some suggestions on what to try first. If it helps I think the problems with this game in particular come from Easy Anticheat, as the other games where trainers worked flawlessly don't have it. My Distro is Mint.

submitted by /u/NBBTCS
[link] [comments]

Hi! My Idle Tower Builder is a game where you build the world’s highest tower. I released it in 2020 and often update with new content and features. Every tower’s floor up to 31 unlocks new facility, which empowers your construction ability. Linux build is available for free on Itch: https://airapport.itch.io/idle-tower-builder

In this game I implement the same ideas which I like as a player:

• no internet connection needed;
• the game stores your progress and calculates your full earnings for being away;
• no need to tap the screen: there is an integrated autoclicker which you should place strategically while giving attention to higher-level management.

Also, there is no AI content, all the code and art was created by human (me :) )

Players like this game, it’s score is 4.5/5, and many youtubers like Real Civil Engineer reviewed it.

So in the latest update I designed 42 unique achievements which span across the whole gameplay

Hope you will like it :) And feel free to give your suggestions: many of the achievements were made by our Discord community ideas.

submitted by /u/GeneralVimes
[link] [comments]

submitted by /u/beer120
[link] [comments]

Hello everyone,

I've been trying to run Proton games on Fedora Linux, and they weren't running - only Linux native games seemed to work. I've installed recommended Steam installation throughrpmfusion( Fedora's Documentation ) and Flatpack installation also, but the Proton problem was the same.

I've realized that Proton wasn't running only through my Backup Drive ( NTFS - File system ), I haven't formatted it yet to see if it's only a Partition problem, but Proton runs well on my Linux Drive. At the same time Linux native games seem to work well even if installed on my Backup Drive.

If Proton games aren't running try to change your installation Drive.

* I'll try to find a way to change the File System without formatting the Drive.

submitted by /u/hundredsongs
[link] [comments]

Worked fine about 4 months ago. Fired up today, and consistently frozen (spinning, not crashing) at this screen.
Anyone seen a similar issue? Anyone know how to resolve?

The problem is not related to button access - I can click the login button fine. But it sits here forever greyed out. The same issue occurs when using the MFA "select number" on phone. I select number, then it greys out and gets stuck forever.

Tried Proton Experimental, Proton Hotfix, and Proton 9. Same issue for all.

https://preview.redd.it/pco3m37knyof1.png?width=1609&format=png&auto=webp&s=0a75d2414215197ab94e53fcf6efc2a814a05189

submitted by /u/Technical-Review-221
[link] [comments]

Hi everyone,

I installed Bazzite today (fully updated). Tried a few games, working properly. Now I'm trying to run Counter strike 2(native, not proton) but the game is crashing on startup.

Relevant dumps: Console History (reversed) 24(2.277825): Engine2PreBreakpadDumpFunction: Building comment. 23(2.277817): Engine2PreBreakpadDumpFunction 22(1.018982): failed to dlopen libpangoft2-1.0.so error=libpangoft2-1.0.so: cannot open shared object file: No such file or directory 21(1.018578): failed to dlopen librenderdoc.so error=librenderdoc.so: cannot open shared object file: No such file or directory 20(1.018432): failed to dlopen /var/home/bazzite/.local/share/Steam/steamapps/common/Counter-Strike Global Offensive/game/bin/linuxsteamrt64/librenderdoc.so error=/var/home/bazzite/.local/share/Steam/steamapps/common/Counter-Strike Global Offensive/game/bin/linuxsteamrt64/librenderdoc.so: cannot open shared object file: No such file or directory 19(0.709068): Failed to save video settings config to 'cfg/cs2_video.txt' 18(0.515208): Unable to open Vulkan pipeline cache shadercache/vulkan/shaders.cache file - might not exist yet. 17(0.505529): VK_EXT_depth_bias_control does not support all required features, disabling. 16(0.505528): VK_KHR_shader_clock does not support shaderDeviceClock, disabling. 15(0.505454): Vulkan Physical Device: Intel(R) Graphics (ARL) 14(0.505446): Failed to save video settings config to 'cfg/cs2_video.txt' 13(0.505103): (1467): ADD setting.gpu_level = 3 12(0.505102): Video Card dxsupport (8086 : 7d51) 11(0.505017): (23): Setting setting.gpu_mem_level to 3 10(0.504917): (28): Setting setting.cpu_level to 3 9(0.195953): USRLOCAL path using Steam profile data folder: /var/home/bazzite/.local/share/Steam/userdata/669238/730/local 8(0.120008): Visibility enabled. 7(0.080067): Steam text filtering initialized (priority one, worldwide) successfully 6(0.079949): CSteam3Client::Activate succeeded. SteamID is [U:1:669238] (76561197960934966), AppID is 730 5(0.079884): ResetBreakpadAppId: Setting non standard break pad app id: 2347771 4(0.079883): ResetBreakpadAppId: Universe is 1 (k_EUniversePublic) 3(0.079872): SteamAPI_Init succeeded. SteamID is [U:1:669238] (76561197960934966), AppID is 730 2(0.071610): InitSteamLogin_Internal: Initializing breakpad. 1(0.071587): Steam AppId(730), BreakpadId(2347771)

System info (sudo lshw) Lenovo ThinkBook 16 G8 IAL

*-cpu description: CPU product: Intel(R) Core(TM) Ultra 7 255H vendor: Intel Corp. physical id: 13 bus info: cpu@0 version: 6.197.2 serial: To Be Filled By O.E.M. slot: U3E1 size: 1798MHz capacity: 5100MHz width: 64 bits clock: 100MHz *-display description: VGA compatible controller product: Arrow Lake-P [Intel Graphics] vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 64 bits clock: 33MHz *-memory description: System Memory physical id: 1 slot: System board or motherboard size: 32GiB

vulkaninfo:

Devices:

GPU0: apiVersion = 1.4.318 driverVersion = 25.2.1 vendorID = 0x8086 deviceID = 0x7d51 deviceType = PHYSICAL_DEVICE_TYPE_INTEGRATED_GPU deviceName = Intel(R) Graphics (ARL) driverID = DRIVER_ID_INTEL_OPEN_SOURCE_MESA driverName = Intel open-source Mesa driver driverInfo = Mesa 25.2.1 conformanceVersion = 1.4.0.0 deviceUUID = 8680517d-0300-0000-0002-000000000000 driverUUID = afb2b8f5-c0f0-b3b9-1b26-a3d62e04805a GPU1: apiVersion = 1.4.318 driverVersion = 25.2.1 vendorID = 0x10005 deviceID = 0x0000 deviceType = PHYSICAL_DEVICE_TYPE_CPU deviceName = llvmpipe (LLVM 20.1.8, 256 bits) driverID = DRIVER_ID_MESA_LLVMPIPE driverName = llvmpipe driverInfo = Mesa 25.2.1 (LLVM 20.1.8) conformanceVersion = 1.3.1.1 deviceUUID = 6d657361-3235-2e32-2e31-000000000000 driverUUID = 6c6c766d-7069-7065-5555-494400000000

First of all, shouldn't it display the correct graphics card name? Not sure if I need to install anything else for Intel Arc 140T. As for the error in the dump, I can confirm that the file doesn't exist. I already ran the "verify the integrity of files", reinstalled twice. Same result, the file doesn't exist.

What else should I do?

submitted by /u/Ace-_Ventura
[link] [comments]