So, I'm using the Flatpack version of Lutris trying to install a game on a 2nd drive. However it keeps giving me this error:

"An error (-5006 : 0x80030001) has occurred while running the setup.

Please make sure you have finished any previous setup and closed other applications. If the error still occurs, please contact your vender: Kingsisle Entertainment, inc.."

I'm trying to install Wizard101 as its a childhood game and I wanna chill while playing it.

However when I try to run it on my main drive. It works perfectly fine the installment.

submitted by /u/Realistic_Patient355
[link] [comments]

submitted by /u/kingkulesza88
[link] [comments]

Would a GTX 1070 work well on Linux? What drivers/whatever should I install for the most peformance (proprietary is fine)? I'm planning to use one as a eGPU with Debian 12 KDE, seems like I have to use X11 too (tears a lot on my iGPU), since Wayland doesn't work well with Nvidia (I can switch back to Wayland through SDDM when I'm not using the eGPU)

Thanks for any advice.

submitted by /u/OkCharity7285
[link] [comments]

submitted by /u/AlphaF2
[link] [comments]

Hi! I'm playing Senran Kagura Burst Re:Newal, and after a few missions of the game working flawlessly, it crashes out of nowhere.There's no graphical glitches, I got the text in the VN sections working properly as well, it just inexplicably crashes.

Specs: Proton GE 9.4 AMD Ryzen 3600 & RX 580 32 GB DDR4 Linux Mint 21.2 Cinnamon Kernel 5.15.0-105-generic

submitted by /u/TemporarySecretary21
[link] [comments]

My setup has an nvidia gpu as primary and amd gpu as secondary. I'm running on wayland with kwin_wayland running on the nvidia gpu. The displays are plugged into the nvidia gpu and vkcube.

The amd gpu does not seem to work for vulkan nor opengl games/programs.

vkcube-wayland, glxgears all work on the nvidia gpu.

vkcube and vkcube-wayland don't work on the amd gpu, with the below crashes:

❯ VK_ICD_FILENAMES=/usr/share/vulkan/icd.d/radeon_icd.i686.json:/usr/share/vulkan/icd.d/radeon_icd.x86_64.json vkcube Selected GPU 0: AMD Radeon RX 570 Series (RADV POLARIS10), type: DiscreteGpu zsh: segmentation fault (core dumped) VK_ICD_FILENAMES= vkcube ❯ vkcube --gpu_number 1 Selected GPU 1: AMD Radeon RX 570 Series (RADV POLARIS10), type: DiscreteGpu zsh: segmentation fault (core dumped) vkcube --gpu_number 1

I'm not sure how to make glxgears run on the amd gpu.

Here are some vulkaninfo logs

❯ vulkaninfo --summary ========== VULKANINFO ========== Vulkan Instance Version: 1.3.279 Instance Extensions: count = 23 ------------------------------- VK_EXT_acquire_drm_display : extension revision 1 VK_EXT_acquire_xlib_display : extension revision 1 VK_EXT_debug_report : extension revision 10 VK_EXT_debug_utils : extension revision 2 VK_EXT_direct_mode_display : extension revision 1 VK_EXT_display_surface_counter : extension revision 1 VK_EXT_surface_maintenance1 : extension revision 1 VK_EXT_swapchain_colorspace : extension revision 4 VK_KHR_device_group_creation : extension revision 1 VK_KHR_display : extension revision 23 VK_KHR_external_fence_capabilities : extension revision 1 VK_KHR_external_memory_capabilities : extension revision 1 VK_KHR_external_semaphore_capabilities : extension revision 1 VK_KHR_get_display_properties2 : extension revision 1 VK_KHR_get_physical_device_properties2 : extension revision 2 VK_KHR_get_surface_capabilities2 : extension revision 1 VK_KHR_portability_enumeration : extension revision 1 VK_KHR_surface : extension revision 25 VK_KHR_surface_protected_capabilities : extension revision 1 VK_KHR_wayland_surface : extension revision 6 VK_KHR_xcb_surface : extension revision 6 VK_KHR_xlib_surface : extension revision 6 VK_LUNARG_direct_driver_loading : extension revision 1 Instance Layers: count = 18 --------------------------- VK_LAYER_AEJS_DeviceChooserLayer Device chooser layer 1.3.0 version 1 VK_LAYER_FROG_gamescope_wsi_x86_64 Gamescope WSI (XWayland Bypass) Layer (x86_64) 1.3.221 version 1 VK_LAYER_INTEL_nullhw INTEL NULL HW 1.1.73 version 1 VK_LAYER_KHRONOS_validation Khronos Validation Layer 1.3.275 version 1 VK_LAYER_LFX_LatencyFleX LatencyFleX (TM) latency reduction middleware 1.3.0 version 1 VK_LAYER_MANGOAPP_overlay Mangoapp Layer 1.3.0 version 1 VK_LAYER_MANGOAPP_overlay Mangoapp Layer 1.3.0 version 1 VK_LAYER_MANGOHUD_overlay_x86 Vulkan Hud Overlay 1.3.0 version 1 VK_LAYER_MANGOHUD_overlay_x86_64 Vulkan Hud Overlay 1.3.0 version 1 VK_LAYER_MESA_device_select Linux device selection layer 1.3.211 version 1 VK_LAYER_MESA_overlay Mesa Overlay layer 1.3.211 version 1 VK_LAYER_NV_optimus NVIDIA Optimus layer 1.3.277 version 1 VK_LAYER_OBS_vkcapture_64 OBS Linux game capture 1.3.279 version 1 VK_LAYER_VALVE_steam_fossilize_32 Steam Pipeline Caching Layer 1.3.207 version 1 VK_LAYER_VALVE_steam_fossilize_64 Steam Pipeline Caching Layer 1.3.207 version 1 VK_LAYER_VALVE_steam_overlay_32 Steam Overlay Layer 1.3.207 version 1 VK_LAYER_VALVE_steam_overlay_64 Steam Overlay Layer 1.3.207 version 1 VK_LAYER_hdr_wsi WSI HDR Layer (x86_64) 1.3.221 version 1 Devices: ======== GPU0: apiVersion = 1.3.277 driverVersion = 550.78.0.0 vendorID = 0x10de deviceID = 0x1e84 deviceType = PHYSICAL_DEVICE_TYPE_DISCRETE_GPU deviceName = NVIDIA GeForce RTX 2070 SUPER driverID = DRIVER_ID_NVIDIA_PROPRIETARY driverName = NVIDIA driverInfo = 550.78 conformanceVersion = 1.3.7.2 GPU1: apiVersion = 1.3.274 driverVersion = 24.0.7 vendorID = 0x1002 deviceID = 0x67df deviceType = PHYSICAL_DEVICE_TYPE_DISCRETE_GPU deviceName = AMD Radeon RX 570 Series (RADV POLARIS10) driverID = DRIVER_ID_MESA_RADV driverName = radv driverInfo = Mesa 24.0.7-arch1.3 conformanceVersion = 1.2.7.1

And here is glxinfo

❯ __GLX_VENDOR_LIBRARY_NAME= glxinfo | grep "renderer string" OpenGL renderer string: NVIDIA GeForce RTX 2070 SUPER/PCIe/SSE2 ❯ __GLX_VENDOR_LIBRARY_NAME=mesa glxinfo | grep "renderer string" glx: failed to create dri3 screen failed to load driver: nouveau OpenGL renderer string: llvmpipe (LLVM 17.0.6, 256 bits) ❯ __GLX_VENDOR_LIBRARY_NAME=mesa MESA_LOADER_DRIVER_OVERRIDE=radeonsi glxinfo | grep "renderer string" glx: failed to create dri3 screen failed to load driver: radeonsi OpenGL renderer string: llvmpipe (LLVM 17.0.6, 256 bits)

Also, kwin is configured with

❯ echo $KWIN_DRM_DEVICES /dev/dri/card0:/dev/dri/card1 ❯ ls -lR /dev/dri/by-path /dev/dri/by-path: total 0 lrwxrwxrwx 1 root root 8 May 15 15:59 pci-0000:05:00.0-card -> ../card1 lrwxrwxrwx 1 root root 13 May 15 15:59 pci-0000:05:00.0-render -> ../renderD129 lrwxrwxrwx 1 root root 8 May 15 15:58 pci-0000:0a:00.0-card -> ../card0 lrwxrwxrwx 1 root root 13 May 15 15:58 pci-0000:0a:00.0-render -> ../renderD128 ❯ lspci | grep VGA 05:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] (rev ef) 0a:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 2070 SUPER] (rev a1)

When the amdgpu is used for kwin_wayland, both cards work, with the amd gpu rendering by default and I can switch to the nvidia gpu with prime-run.

However, I want to use the nvidia gpu as my primary gpu for VFIO, passing through the amd gpu into a macos vm. Also, the amd gpu doesn't seem to do 4k 144hz whilst my nvidia gpu does. I'm not expecting to play games at this resolution+refresh rate, but I do want my the desktop to be smooth with a high refresh rate and high resolution.

submitted by /u/Latrolage
[link] [comments]

submitted by /u/fakesudopluto
[link] [comments]

Following this post on the SteamDeck subreddit, I copied the game files from windows to linux and used Proton 8.0-5 to run the 'Solo_Leveling_ARISE.exe'. But the problem is that I get this warning of insufficient storage space after signing in. Can anyone help?

https://preview.redd.it/ydzqtv8i1j0d1.png?width=1366&format=png&auto=webp&s=a346a5182c825244e41c5feee901abad05b403b5

submitted by /u/AsterThis
[link] [comments]

is there any way to play valorant on nobara 39? if there is anyway please tell me.
or if there is any way to reinstall windows 10 with out pen drive on it..

submitted by /u/gameslo69
[link] [comments]

Hello.

I have desktop PC with nvidia 1030 gpu running Linux Mint 21.3 Cinnamon.

ETS2 is installed with Steam, i had it running 50 fps and was happy.

With recent ETS2 version 1.50 update i'm experiencing huge FPS drop to 25-30 fps maximum. Turning off antialiasing, shadows and textures does not help. Mods disabled. Disabling nvidia PROTON_ENABLE_NVAPI does not help. Tried with proton experimental and proton 9, same results.

FPS drop appears only when the engine is working in interior view. Exterior view is not affected.

Turning engine off reverts FPS to normal, until started again. Muting engine sound does not affect this. Cabin physics disabled. I checked different truck, same -20..40 fps drop. Must have been threading issue of the engine physics processing.

Also there is -10 fps drop if i turn cabin lights, even with engine off.

Any ideas what should i check?

submitted by /u/Dist__
[link] [comments]

submitted by /u/Singhvistaar
[link] [comments]

It's been fun but I want to try the good old tried and true Debian. I use GNOME on Arch and everything works great, it's just a little wearisome always updating, and I want to try something different. Debian seems to be the opposite end of the coin but I enjoy how it's a simple highly renowned and stable independent distro that isn't based on something else, similarly to Arch.

I mainly use my PC for gaming, it's a prebuilt CyberpowerPC with AMD Ryzen hardware, drivers from stable mesa. I use the zen kernel and keep everything up to date, pretty much all games work with Proton. It was all on one nearly 5 year old installation across like 8 Gnome versions. I installed everything with pacman/yay and update weekly, and I'm familiar with basic system maintenance like pacnews clearing cache troubleshooting etc. For a switch to Debian, are there any roadblocks I can expect in regards to gaming, or changes of habits I should expect? I play a mixed bag of old and new games, some emulated, some from Steam or Heroic launcher. I also have a Gamesir T4 Kaleid game controller which works out the box with Arch so I can only assume it'll work on Debian too.

submitted by /u/gregport233
[link] [comments]

Title

submitted by /u/Titanmaniac679
[link] [comments]

Whenever I want to play a game off of Steam using Lutris, it tells me that it's launching, but it just hangs on it indefinitely. Now, I will say that there is some great documentation on this. There's plenty of people who've had this issue and presumably have managed to fix it. I, however, have next to no idea what I'm doing, as every guide I've seen, here's an example of one.

My main issue is that, following that guide, I've realized that the file in question, "config.py" is read only, meaning I can't edit it. It's owner is set as root, and I'm not sure how I'm supposed to run a text file as root. (I'm also a noob to Linux, so a lot of this stuff is going over my head.)

I'm tired, it's about 9:00 at the time I'm posting this, and I really don't want to screw around with this right now and get worked up over it.

submitted by /u/Nowhere_King
[link] [comments]

Ok so I have a Thinkpad X1 Carbon (original 2012 model). 8gb ram. And a core 17-3667U. It's more than capable of running windows 10 and 11, But honestly I'm not really vibing with Windows anymore.

The version of Linux I was intending on trying was Linux Mint.

I don't need a huge amount of power, I use parsec connected to my desktop pc for things like video editing.

So essentially my question is: What can I expect as a beginner? Any recommended software? What range of games could I theoretically get working? ETC.

Apologies for being very broad with this but I literally have no experience with Linux yet.

(Extra: I have used a steam deck in the past, could I use the laptop normally with steamOS by chance? Any benefits?)

submitted by /u/DoodleJake
[link] [comments]

Hey all, so i finally swapped over to the latest version of mint cinnamon from windows 11 after having issues with bloat taking up space, i have an rtx 2060 with an ryzen 9 5900x and 32gb of ram, my question is, will mint automatically detect and install these drivers when i launch games? i loaded up valheim and am getting 80fps which seems about right, when i check system info it shows the gpu as "NVIDIA Corporation TU106 [GeForce RTX 2060 12GB]" would this mean that the drivers were installed correctly?

submitted by /u/AffixedSamurai21
[link] [comments]

EDIT: It appears running in Legacy OpenGL mode allows me to use the right resolution, but not in Vulkan.

There's no option above 1920x1080 on TF2. Even launching with the -w -h/-width -height, or when using either -full or -windowed launch commands.

Is there some other method I can force it to use 2560x1440?

Left monitor correctly shows 1080p as Native, but my main right monitor only shows up to 1080p and it knows its not native. But refuses to show native 1440p.

NVIDIA 2060 12GB MSI (on 550 drivers), i7 10700, EndeavorOS

submitted by /u/KalebNoobMaster
[link] [comments]

After some extensive work, I finally got BG3MM to work as it should, yeah! However, I'm running into a problem where certain mods are altering the character creation portion of the game negatively. For example, I've lost Archfey under Lock and Storm under Sorc. None of this come back unless I delete all the mods. Additionally, I've lost the +2 and +1 boxes under Abilities, but there seems to be extra points added to the base points that aren't apart of the distributable points. BG3SE works as it should even though BG3MM doesn't see it.

I have a lot of mods added in, so sorry for the long ass post, lol! Here's my mod list:

• 0 CommunityLibrary
• 1 Honour
• 2 DiceSet_06
• 3 TagFramework
• 4 NoIntroPak
• 5 5eSpells
• 6 HomebrewSpells
• 7 SpellListCombiner
• 8 VladsGrimoire
• 9 VFX_Library_SHV
• 10 Icon_Library_SHV
• 11 Elemental_Spells_SHV
• 12 FrostBlade
• 13 Jolt
• 14 ScarletWarlock_Main
• 15 ScarletWarlock_UltraVFX
• 16 Thunder Strike Cantrip
• 17 Valkrana's Spellbook
• 18 Spells Enhanced - Elemental Weapon - C2
• 19 Spells Enhanced - Elemental Weapon - Sorcerer addon - A
• 20 Animate Dead++
• 21 Animate Dead++ Spell List Addon
• 22 Incubate Death
• 23 DreadOverlord
• 24 Succubus
• 25 Blood Hunter
• 26 Blood Hunter Expanded
• 27 Artificer
• 28 Artificer-5e-Addon
• 29 Chronurgy Magic
• 30 Graviturgy Magic
• 31 ChronurgyMagic5eSpells
• 32 WoWDeathKnightClass
• 33 WoWDeathKnightClassExtraFeat
• 34 SoulTaker
• 35 DeathsongSet
• 36 DeathsongSetGreatsword
• 37 DeathsongSetTutorialChest
• 38 Horns of Faerûn
• 39 Horns of Faerun Modded Races Patch
• 40 Untamed - CORE
• 41 FizbansTreasuryOfDragons
• 42 BB26DragonbornSubraceExpansion(Fizbans)
• 43 Ghastly Ghouls: Playable Undead Race
• 44 HalfDragon
• 45 ASTRL Tiefling Subraces
• 46 Ranger Unleashed
• 47 Paladin Unleashed - Standalone - Level 2
• 48 Sorcerer Unleashed
• 49 Drow Unleashed - Ultimate
• 50 Half-Elf Unleashed
• 51 Half-Orc Unleashed
• 52 Human Unleashed
• 53 Tiefling Unleashed
• 54 Barbarian Unleashed
• 55 Bard Unleashed
• 56 Cleric Unleashed
• 57 Druid Unleashed
• 58 Monk Unleashed
• 59 Rogue Unleashed
• 60 Githyanki Unleashed - Astral Guardians
• 61 Dragonborn Unleashed
• 62 Dragonbreath Unleashed - Standalone
• 63 Elf Unleashed
• 64 Warlock Unleashed - Ultimate Warlock
• 65 Wizard Unleashed
• 66 Command Undead
• 67 Feat Every 1 Level
• 68 Fighter Unleashed
• 69 KvCampEvents
• 70 WarlockEldritchBlastTweaks
• 71 UniversalArmourFixer
• 72 Valkrana's Limited Edition Bone
• 73 Valkrana's Skeleton Crew Feat
• 74 Valkrana's Skeleton Emporium
• 75 Valkrana's Undead Encounters
• 76 Rings Expanded - Immersive
• 77 SorcererLearnSpells
• 78 Stormwhisper Feat
• 79 Tressym Familiar
• 80 Undeath Feat
• 81 Stats_UnderwearOfAbilityScores
• 82 AppearanceEditOrigins
• 83 AppearanceEditEnhanced
• 84 Additional Fighting Styles
• 85 BasketEquipmentNSFW
• 86 BetterDualWielding
• 87 BetterDualWieldingBuffSpell
• 88 Druid Wild Shape Overhaul
• 89 Druid WSO Ritual
• 90 Everybody Dyes Unlimited Dyeing.
• 91 ExtraAttackCompatibility
• 92 featsextra
• 93 Frostmourne
• 94 Lightning Wolf
• 95 Necrosword
• 96 InfiniteEverything
• 97 X2SpellSlotsFeatEveryLevel
• 98 UnlockLevelCurve
• 99 UnlockLevelCurve_Patch_5eSpells
• 100 UnlockLevelCurve_Patch_Double
• 101 TutorialChestSummoning
• 102 CompatibilityFramework
• Override featsextra_ORDERFEATS
• Override ImprovedUI
• Override ImprovedUI Assets
• Override ModFixer
• Override Trips_Shaders

Hopefully someone seems something out of place. TIA!

submitted by /u/blazblu82
[link] [comments]

There is a mod I wish to use that is implemented as an xinput1_3.dll placed beside the exe. The only way I found to get it to load was to set the dll override for xinput1_3.dll to "n,b"

But this breaks gamepad input. Is there anything I can do to get both the gamepad and the mod to work with WINE?

submitted by /u/Jade____
[link] [comments]

So after years of considering it, I finally deleted Windows and installed Linux Mint, mostly inspired by one of my favorite creators, Mutahar from someordinarygamers.

And, so far so good.

I still have to figure out some stuff and find some alternatives to the programs I used to work with, learn Davinci Resolve, use a VM for Illustrator and Photoshop but I think I can get used to it.

Some games I can't play due to anticheat (e.g. Valorant) but I guess it's a sacrifice I have to make for now.

I'm also kinda excited to learn stuff about Linux, I grabbed a copy of "How Linux Works" and plan on reading that, along with some YT videos about certain stuff, a little bit of cybersecurity knowledge wouldn't hurt either.

So hello Linux people

submitted by /u/gdsergio
[link] [comments]